Read Sharp LC-70LE741E (serv.man10) Service Manual online
LC-60/70LE740E/RU,741E/S,743E,60LE840E/RU,841E/S,843E,80LE645E/RU,646E/S,648E
5 – 2
2. Entering and exiting the adjustment process mode
1) Unplug the AC power cord of running TV set to force off the power.
2) While holding down the “VOL (-)” and “INPUT” keys on the set at once, plug in the AC power to turn on the power.
The letter “K” appears on the screen. This state is in Inspection mode.
3) Next, hold down the “VOL (-)” and “CH (
)” keys on the set at once.
Multiple lines of blue characters appearing on the screen indicate that the set is now in the adjustment Process mode.
If you fail to enter the adjustment process mode (the display is the same as normal startup), retry the procedure.
4) To exit the adjustment process mode after the adjustment is done, unplug the AC power cord to force off the power.
(When the power is turned off with the remote controller, once unplug the AC power cord and plug it in again. In this case, wait for 20 seconds or
so after unplugging.)
so after unplugging.)
3. Remote controller key operation and description of display in adjustment process mode
1. Key operation
Input mode is switched automatically when relevant adjustment is started so far as the necessary input signal is available.
4. Description of display
CAUTION: Use due care in handling the information described here lest the users should know how to enter the adjustment process mode.
If the settings are tampered with in this mode, unrecoverable system damage may result.
Remote controller key
Main unit key
Remote controller key Main unit key Function
CH keys (
/
)
CH (
/
)
Moving an item (line) by one (UP/DOWN)
VOL keys (+/-)
VOL (+/-)
Changing a selected item setting (+1/-1)
Cursor ( /
)
—
Turning a page (PREVIOUS/NEXT)
Cursor ( / )
—
Changing a selected line setting (+10/-10)
INPUT
INPUT
Input source switching (toggle switching) (TV
→EXT1→ etc...)
OK
—
Executing a function
RETURN
—
Returning to a present page
No.
Description
Display specification
(1)
Present page/number of total pages
2char/2char Decimal Number mark.
(2)
Input that has been selected now
TUNER/DTV/INPUT1/INPUT2/INPUT3/INPUT5/INPUT6/INPUT7/etc.
⋅⋅⋅
(3)
Present colour system
AUTO/N358/N443/PAL/SECAM/480i/580i/1080i/50 etc.
⋅⋅⋅
(4)
Inducing display
EUROPE/RUSSIA/SWEDEN
(5)
Inch setting and Model name display
Inch setting and Model name display
(6)
Item name
Max. 30 char
(7)
Parameter
Max. 60 char
(1) Present
˴page / number of total pages
(4) Inducing display
(3) Present colour system
(2) Input that has been selected now
(5) Inch setting and Model name display
(6) Item name
(7) Parameter
1.00 (E 2011/**/** )
xxxxxxx
xxxxxxx
xxxxxxxx/xxxx
xxxxxxx
xxxxx/YES
xxxxxxx
xxxxxxx
xxxxxxxx/xxxx
xxxxxxx
xxxxx/YES
xxxxxxx
0
1)xxxxxx 2)xxxxxx
3)xxxxxx 4)xxxxxx
0
1)xxxxxx 2)xxxxxx
3)xxxxxx 4)xxxxxx
0
0 0 0 0
1/21
INPUT1
AUTO
EURO
MAIN Version
BOOT Version
Monitor Version
T-CON Version/LED CON Version
NET TV KEY/MAC
CI+INFO/SECURE BOOT
BOOT Version
Monitor Version
T-CON Version/LED CON Version
NET TV KEY/MAC
CI+INFO/SECURE BOOT
FRC Version
xxxxxxx
xxxxxxx
xxxxxxx
MARLIN
WMDRM
WMDRM
LAMP ERROR
xxxxxxx
IR Micom Version
MONITOR ERR CAUSE
NORMAL STANDBY CAUSE
ERROR STANDBY CAUSE
ERROR STANDBY CAUSE
Click on the first or last page to see other LC-70LE741E (serv.man10) service manuals if exist.