Read Sharp LC-65GD1E (serv.man5) User Guide / Operation Manual online
55
Using external equipment
AVC System (rear view)
SCART cable
(commercially available)
(commercially available)
Connecting a VCR
You can use the INPUT 2 terminal when connecting a
VCR and other audiovisual equipment.
If your VCR supports TV-VCR advanced “AV Link”
systems (see page 56), you can connect the VCR to
the INPUT 2 terminal on the AVC System using the
fully-wired SCART cable.
VCR and other audiovisual equipment.
If your VCR supports TV-VCR advanced “AV Link”
systems (see page 56), you can connect the VCR to
the INPUT 2 terminal on the AVC System using the
fully-wired SCART cable.
AVC System (rear view)
VCR
Decoder
SCART cable
(commercially available)
(commercially available)
Decoder
Connecting a DVD player
You can use the INPUT 3 terminal when connecting to
a DVD player and other audiovisual equipment.
a DVD player and other audiovisual equipment.
AVC System (rear view)
DVD player
Component cable
(commercially available)
(commercially available)
SCART cable
(commercially available)
(commercially available)
Connecting a game console or camcorder
A game console, camcorder and some other
audiovisual equipment are conveniently connected
using the INPUT 4 terminals.
audiovisual equipment are conveniently connected
using the INPUT 4 terminals.
AVC System (front view)
Game console/
Camcorder
Composite video cable
(commercially available)
(commercially available)
S-video cable
(commercially available)
(commercially available)
NOTE
• In cases when the decoder needs to receive signal from
the System, make sure to set “Decoder” to “INPUT1” in
the Programme Setup “Manual Adjust” menu. (See page
25.)
the Programme Setup “Manual Adjust” menu. (See page
25.)
NOTE
• TV-VCR advanced “AV Link” systems may not be
compatible with some external sources.
• It is recommended to connect to the INPUT 2 terminal
when using a decoder for ground wave signal input with
a VCR. If INPUT 2 signals preset in auto installation or
programme setup, make sure to set “Decoder” to
“INPUT2” in the Programme Setup “Manual Adjust” menu.
(See page 25.)
a VCR. If INPUT 2 signals preset in auto installation or
programme setup, make sure to set “Decoder” to
“INPUT2” in the Programme Setup “Manual Adjust” menu.
(See page 25.)
Connecting a decoder
You can use the INPUT 1 terminal when connecting a
decoder and other audiovisual equipment.
decoder and other audiovisual equipment.
NOTE
• When using component cable, select “COMPONENT”
from “Input Select” in the menu. (See page 59.)
NOTE
• The S-video terminal has priority over the video terminals.
• You can also connect the game console to INPUT 1 or 3
• You can also connect the game console to INPUT 1 or 3
terminals to enjoy clearer picture.
LC-65GD1E(E)-i
05.9.21, 7:33 AM
55
Click on the first or last page to see other LC-65GD1E (serv.man5) service manuals if exist.