LC-65GD1E (serv.man5) - Sharp TV User Guide / Operation Manual. Page 21

You can change channels in several ways.

Using Pr/son the remote control unit

• Press Pr to increase channel number.
• Press Ps     to decrease channel number.

• Pr/s on the Display operates the same as Pr/son

the remote control unit.

• In TV input mode, you cannot change the DTV input mode

channel, and vice versa.

MONO

12

SAT.1

12

SAT.1

B/G

PAL

(Example)

Pr/s

• Complete this procedure within 3 seconds, otherwise the

selection will not be made on the 2-digit channel mode.

When viewing Teletext information
View a page directly which is 3-digit page number from
100 to 899 by pressing buttons 0 to 9.

Using Flashback (A) on the remote
control unit

Press A to switch the currently tuned channel to the
previously tuned channel.
Press A again to switch back to the currently tuned
channel.

Press A to toggle between the currently selected input
source and the previously selected one.

Press A to return to the previous page in TELETEXT
mode.

Channel display changes approximately after 3
seconds as shown below.

Select the channels directly by pressing buttons 0 to
9.

a
To select a 1-digit channel (e.g. channel 2):
• Press the 2 button.
To select a 2-digit channel (e.g. channel 12):
• Press 1, followed by 2.
• When you enter the channel, a 3-digit input underbar

appears in digital TV mode and a 2-digit in analogue
TV mode.
Once you input a channel it is set after a few
moments if there are no other operations. Or press
OK to set immediately after input.

LC-65GD1E(E)-c

05.9.21, 7:23 AM

19