LC-60UD20KN (serv.man5) - Sharp TV User Guide / Operation Manual. Page 14

When the TV is powered on for the first time after 
purchase, the initial auto installation wizard appears. 
Follow the menus and make the necessary settings 
one after another.

 

E

Is the antenna cable connected?

 

E

Is the AC cord plugged in?

 

Press 

a on the TV.

•  The initial auto installation wizard appears.

 

Setting the OSD language.

Press 

a/b/c/d to select the desired language, and 

then press 

;.

 

Selecting the location of the TV.

HOME

STORE

Press 

c/d to select where you will use this TV, and 

then press 

;.

•  The confirmation screen pops up only when 

selecting “STORE”. Press 

c/d to select “Yes” or 

“No”.

•  HOME: “STANDARD” will be the default value for 

the “AV mode” setting.

•  STORE: “DYNAMIC (Fixed)” will be the default 

value for the “AV mode” setting. If the “AV mode” 
is changed, the TV will automatically switch back 
to “DYNAMIC (Fixed)” when there is no operation 
using the TV or remote control unit for 30 minutes.

•  STORE: A demonstration image will be displayed 

after initial auto installation is completed. If you 
have chosen “STORE” by mistake, go to “TV 
Menu” > “Setup” > “View setting” > “Reset” > 
select “HOME” again.

 

Setting the country.

Press 

a/b/c/d to select your country or area, and 

then press 

;.

•  This setting screen only appears during the initial 

auto installation.

•  Some functions may not display or be selectable 

depending on the country setting or cable provider 
selection.

 

Setting the PIN.

 

1

Press 

c/d to select “Yes”, and then press 

;.

•  When “No” is selected, the PIN code setting is 

skipped.

 

2

Enter a four-digit number as a PIN using the 
0–9 buttons.

 

3

Enter the same four-digit number as in step 
2 to confirm.

 

4

Press 

;.

•  When “France” or “Italy” is selected in the country 

setting, the PIN code setting cannot be skipped.

•  “0000” cannot be set as the PIN code.
•  When the PIN code setting is skipped, the default PIN 

code (“1234”) will automatically be set.

•  To change the PIN setting, refer to Individual setting — 

PIN (Page 41). To reset the PIN setting (PIN input will no 
longer be needed), refer to Reset the PIN (Page 76).

 

Starting channel search.

Digital search

Analogue search

Satellite search

Press 

a/b to select “Digital search”, “Analogue 

search” or “Satellite search”, and then press 

;.

•  After performing “Digital search” or “Analogue 

search”, the screen switches to the “Satellite 
search” setting. You should then execute “Yes” if 
you want to search for satellite channels.

•  To watch both digital broadcasts and analogue 

broadcasts, you should perform “Digital search” or 
“Analogue search” from “Auto installation” under 
the “Setup” menu (Page 38).

•  When you select “Satellite search”, only satellite 

broadcasts will be searched.

•  If you want to search for more broadcasts, execute 

“Additional search” from the “Programme setup” 
menu (Pages 38

_40).

•  If you turn off the power on the TV while performing a 

channel search, the initial auto installation wizard will 
not appear. The auto installation function allows you 
to execute the installation again from “TV Menu” > 
“Setup” > “View setting” (Page 38).

•  The initial auto installation wizard will abort if you leave 

the TV unattended for 30 minutes before searching for 
channels.

•  When “Italy” or “France” is selected in the country 

setting, the default age restriction value is set to 18.