Read Sharp LC-60LE925E Handy Guide online
Handy Guide
Version 1.6
Issue 08/2011
Issue 08/2011
24 of 28
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
Viewing 3D Images
Receiving a 3D image signal that can be detected automatically
The image signal may contain a 3D identification signal.
Compatible 3D equipment (i.e Blu-ray player) required and must be connected via HDMI v1.4
(HDMI Input 1 on Quattron TV).
(HDMI Input 1 on Quattron TV).
You can enable the TV to automatically detect the 3D image type.
Go to “Menu” > “Setup” > “Option” > “3D setup” > “3D auto change”.
Go to “Menu” > “Setup” > “Option” > “3D setup” > “3D auto change”.
When “3D auto change” is set to “Yes”
The 3D display format is detected automatically and the appropriate
The 3D display format is detected automatically and the appropriate
3D image is displayed.
When “3D auto change” is set to “No”
The confirmation message is displayed.
The confirmation message is displayed.
• Press 3D.
• Press cursor left/right d to select “Yes”, and then press OK.
• Turn on the power of the 3D glasses, and then wear the 3D
• Press cursor left/right d to select “Yes”, and then press OK.
• Turn on the power of the 3D glasses, and then wear the 3D
glasses.
• Press the power button for at least two seconds.
• The LED light blinks three times.
NOTE
• If you do not want to switch to 3D mode automatically, set “3D auto change” to “No”.
• If you do not want to switch to 3D mode automatically, set “3D auto change” to “No”.
• When the TV is receiving a 3D image signal that can be detected automatically, the 3D mode
icon is displayed in the channel display.
icon is displayed in the channel display.
Switching 3D to 2D mode
When you press 3D while you are watching the TV in 3D mode, the TV switches to 2D mode.
• Press 3D during the 3D mode.
• Select “Yes”, and then press OK to switch to 2D mode.
• Select “Yes”, and then press OK to switch to 2D mode.
• Take off the 3D glasses and turn off the power of the 3D
glasses.
• Press the power button for at least two seconds.
• The LED light lights for two seconds.
• The LED light lights for two seconds.
NOTE
• If the input signal switches to 2D, 2D images are displayed
automatically.
automatically.
• 3D mode is cancelled automatically when the setting is changed,
input source is changed, the input signal resolution is changed or the
input source is changed, the input signal resolution is changed or the
power is turned off.
Click on the first or last page to see other LC-60LE925E service manuals if exist.