Read Sharp LC-60LE925E (serv.man15) Service Manual online
LC-46/60LE925E (1st Edition)
4 – 1
LC-46LE925E
Service Manual
CHAPTER 4.
REMOVING OF MAJOR PARTS
[1] REMOVING OF MAJOR PARTS (LC-46LE925E)
1. Removing of Stand Unit and Rear Cabinet Ass’y.
1. Remove the 1 lock screw and detach the Support Cover .
2. Remove the 4 lock screws and detach the Stand Unit .
3. Remove the 1 lock screw and detach the AC Cord Cover .
4. Disconnect AC wire and detach the AC Cord .
5. Remove the 4 lock screws , 4 lock screws , 1 lock screw and 16 lock screws and detach the Rear Cabinet Ass’y .
[AC]
[AC]
3
4
Stand Unit
Stand Unit
6
1
2
Support Cover
Support Cover
AC Cord
Cover
5
9
8
7
10
11 Rear Cabinet Ass'y
12
AC Cord
LC-46/60LE925E (1st Edition)
4 – 2
2. Removing of Stand Cover and Speaker-L/R.
1. Remove the 2 lock screws and detach the Stand Cover .
2. Disconnect SP wire.
3. Detach the Speaker-L , Speaker-R .
4. Detach the Insulation Sheet (AC) .
[SP]
[SP]
MAIN Unit
1
2 Stand Cover
3 Speaker-L
4
Speaker-R
5
Insulation
Sheet (AC)
Sheet (AC)
LC-46/60LE925E (1st Edition)
4 – 3
3. Removing of Connectors
1. Disconnect the following connectors from the MAIN Unit. (SB, LB, PD, LW, RA, RL, IR, HN)
2. Disconnect the following connectors from the POWER Unit. (LA, PD, PL, AS, PN)
3. Disconnect the following connectors from the LCD CONTROL Unit. (LW, PL)
4. Disconnect the following connectors from the LED DRIVER Unit. (LA, LB)
5. Disconnect the following connectors from the HDMI CONVERTER Unit. (PN, HN)
[AS]
[PD]
[LW]
[RA]
[RL]
[LA]
[PN]
[PD]
[SB][LB]
[LA]
[LB]
[PL]
[HN]
[PN]
[HN]
[IR]
[PL]
[LW]
MAIN Unit
MAIN Unit
LCD CONTROL Unit
LCD CONTROL Unit
LED DRIVER Unit
LED DRIVER Unit
POWER Unit
POWER Unit
HDMI CONVERTER Unit
HDMI CONVERTER Unit
LC-46/60LE925E (1st Edition)
4 – 4
4. Removing of MAIN Unit, POWER Unit, HDMI CONVERTER Unit, Speaker (Woofer), Stand Angle and 46” LCD
Panel Module Unit.
Panel Module Unit.
1. Remove the 7 lock screws and detach the MAIN Unit .
2. Remove the 2 lock screws , 1 lock nut and detach the Terminal Angle (Bottom) .
3. Remove the 2 lock screws and detach the Terminal Angle (Side) .
4. Remove the 6 lock screws and detach the POWER Unit .
5. Remove the 6 lock screws and detach the HDMI CONVERTER Unit .
6. Remove the 4 lock screws and detach the Speaker (Woofer) .
7. Remove the 1 lock screw and detach the LCD Angle (Bottom-R) .
8. Remove the 2 lock screws and detach the LCD Angle (Top-L) .
9. Remove the 2 lock screws and detach the LCD Angle (Top-R) .
10.Remove the 2 lock screws and detach the LCD Angle (Bottom-L) .
11.Remove the 2 lock screws and detach the LCD Angle (B-C-A) .
12.Remove the 2 lock screws and detach the LCD Angle (B-C-B) .
13.Remove the 2 lock screws and detach the ECO Switch with Holder .
14.Remove the 8 lock screws and detach the Stand Angle .
15.Remove the 2 lock screws and detach the BL Support Angle .
16.Remove the 3 lock screws and detach the 46” LCD Panel Module Unit .
䎾䎶䎥䏀
1
2 MAIN Unit
1
1
3
5
33
4 Terminal Angle
(Bottom)
Terminal Angle
(Side)
6
7
8
POWER Unit
9
10
HDMI
CONVERTER
Unit
11
12
Speaker
(Woofer)
15
16
LCD Angle
(Top-L)
LCD Angle (Top-R)
17
18
19
20
LCD Angle
(Bottom-L)
LCD Angle
(Bottom-R)
LCD Angle
(B-C-A)
LCD Angle
(B-C-B)
21
22
13
14
23
24
25
26
ECO Switch
with Holder
27
28
Stand Angle
29
30
BL Support
Angle
31
31
32 46" LCD Panel
Module Unit