LC-60LE822E (serv.man18) - Sharp TV User Guide / Operation Manual. Page 12









2

1



Standard DIN45325 plug (IEC 169-2) 75 q coaxial cable
Satellite antenna cable
AC cord (product shape varies in some countries)
Check that the MAIN POWER switch on the rear of the TV is turned on 

(;).
Cable clamp (bundle the cables with the clamp)











Place the TV close to the AC outlet, 

and keep the power plug within 

reach.

In order to receive coded digital stations, a common interface module (CI module) and a CA card must be inserted in the 

CI slot of the TV.

Carefully insert the CI module in 

the CI slot with the contact side 

forward.

The logo on the CI module must 

be facing outward from the rear 

of the TV.

Go to “Menu” > “Setup” > “Option” > “CI menu”.

This menu is only available for digital stations.

The content of this menu depends on the provider of the CI module.

General information on CI module displays.

Adjustment parameters of each CA card displays.

You can input numerical values such as passwords here.

•

•

It takes about 30 seconds to certify the license key when you insert a CA card into the CI+ compatible CI module for the first time. This 

process may fail when there is no antenna input or you have never run “Auto installation”.

The CI+ compatible CI module sometimes upgrades its firmware. You may not receive any TV images before upgrading. You can only use 

the power button during upgrading.

The CI+ compatible CI module does not allow you to output any copy protected programmes using monitor out. In this case, the copy 

protect icon* is shown in the programme information when 

P. INFO is pressed.

Protect icon: X

If the TV displays an update confirmation message for the CA card while receiving CI+ compatible broadcasts, follow the screen prompts.

Make sure that the CI module is properly inserted.

•

•

•

*

•

•