Read Sharp LC-60LE636E (serv.man7) Service Manual online
LC-60LE635E/636E/638E (1st Edition)
5 – 16
8. Video signal adjustment procedure
The adjustment process mode menu is listed in Section 5.
Signal generator level adjustment check. (Adjustment to the specified level)
8.1. Entering the adjustment process mode
Enter the adjustment process mode according to Section 2.
8.2. PAL signal adjustment
* ATTENTION: Please execute [12.3. TUNER adjustment] afterwards if you adjust [12.2. PAL signal adjustment] after all adjustments are
completed.
8.3. TUNER adjustment
8.4. SECAM adjustment
• Composite signal PAL
: 0.7Vp-p
± 0.02Vp-p (Pedestal to white level)
• 33K component signal (50 Hz)
: Y level
: 0.7Vp-p
± 0.02Vp-p (Pedestal to white level)
: PB, PR level
: 0.7Vp-p
± 0.02Vp-p
• ANALOG PC (RGB) signal
: RGB level
: 0.7Vp-p
± 0.02Vp-p
Adjustment point
Adjustment conditions
Adjustment procedure
1
Setting
[Signal]
PAL
Full field colour bar
composite signal
PAL
Full field colour bar
composite signal
[Terminal]
EXT1 SCART Video (PAL)
IN
EXT1 SCART Video (PAL)
IN
• Feed the PAL full field colour bar signal (75% colour saturation) to EXT1
SCART IN.
2
Auto adjustment
performance
performance
Adjustment process
[PAL ADJ] page 4/20
[PAL ADJ] page 4/20
Bring the cursor on [PAL ADJ] and press [OK].
[PAL ADJ OK] appears when finished.
[PAL ADJ OK] appears when finished.
Adjustment point
Adjustment conditions
Adjustment procedure
1
Setting
[Signal]
PAL sprit field colour Bar
RF signal UV
PAL sprit field colour Bar
RF signal UV
[Terminal]
TUNER
TUNER
• Feed the PAL Split Field colour bar signal (E-12ch) to TUNER.
• Make sure the PAL colour bar pattern has the sync level of 7:3 with the picture
• Make sure the PAL colour bar pattern has the sync level of 7:3 with the picture
level.
Signal level: 55 dB
µV ± 1dB (75Ω LOAD)
2
Auto adjustment
performance
performance
Adjustment process
[TUNER ADJ] page 3/24
[TUNER ADJ] page 3/24
Bring the cursor on [TUNER ADJ] and press [OK].
[TUNER ADJ OK] appears when finished.
[TUNER ADJ OK] appears when finished.
Adjustment point
Adjustment conditions
Adjustment procedure
1
Setting
[Signal]
SECAM
Full field colour Bar Signal
SECAM
Full field colour Bar Signal
[Terminal]
EXT1 SCART IN
EXT1 SCART IN
• Feed the SECAM full field colour bar signal (75% colour saturation) to EXT1
SCART IN.
2
Auto adjustment
performance
performance
Adjustment process
[SECAM ADJ] page 4/24
[SECAM ADJ] page 4/24
Bring the cursor on [SECAM ADJ] and press [OK].
[SECAM ADJ OK] appears when finished.
[SECAM ADJ OK] appears when finished.
[VIDEO input signal]
100% white
Black
[E-12CH]
χ100% white
[VIDEO input signal]
100% white
Black
Click on the first or last page to see other LC-60LE636E (serv.man7) service manuals if exist.