Read Sharp LC-60LE636E (serv.man6) Service Manual online
LC-60LE635E/636E/638E (1st Edition)
4 – 1
LC60LE635E
Service Manual
CHAPTER 4.
REMOVING OF MAJOR PARTS
[1] REMOVING OF MAJOR PARTS (LC-60LE830E,RU/831E,S/833E)
1. Removing of Stand Unit and Rear Cabinet Ass’y.
1. Remove the 2 lock screws and detach the Stand Support Cover .
2. Remove the 4 lock screws and detach the Stand Unit .
3. Remove the 1 lock screw and detach the AC Cord Cover .
4. Disconnect AC Cord .
5. Remove the 4 Vesa Hole Covers , 7 lock screws and 18 lock screws and 3 lock screws
and detach the Rear Cabinet Ass’y .
4
Stand Unit
AC Cord
7
Rear Cabinet Ass'y
11
3
8
1
2
Stand Support Cover
5
6
9
AC Cord Cover
10
10
10
12
LC-60LE635E/636E/638E (1st Edition)
4 – 2
2. Removing of Speaker-L/R.
1. Remove the 2 lock screws and the 1 lock screw detach the Bottom Cover .
2. Remove the 14 lock screws and detach the Fixing Metal Angle .
3. Disconnect SP wire.
4. Detach the Speaker-L , Speaker-R .
[SP]
[SP]
5
Speaker-L
6
Speaker-R
3
1
4
Fixing Metal Angle
2 Bottom Cover
MAIN Unit
7
LC-60LE635E/636E/638E (1st Edition)
4 – 3
3. Removing of Connectors.
1. Disconnect the following connectors from the MAIN Unit. (SB, PD, LW, PL, RC, CI)
2. Disconnect the following connectors from the POWER SUPPLY Unit. (PD, L1, AS)
3. Disconnect the following connectors from the LCD Control Unit. (LW, PL)
MAIN Unit
POWER SUPPLY Unit
[PD]
[L1]
[PL]
[LW]
LCD Control Unit
MAIN Unit
[SB]
[PD]
[CI]
[RC]
[PL]
[LW]
[AS]
LC-60LE635E/636E/638E (1st Edition)
4 – 4
4. Removing of MAIN Unit, POWER/LED Drive Unit, speaker (Sub Woofer), 60” LCD Panel Module Unit.
1. Remove the 5 lock screws and detach the Main PWB Shield .
2. Remove the 2 lock screws and detach the MAIN Unit .
3. Remove the Hexagon screw and detach the Terminal Angle Bottom and Earhe Spring .(Only LC-60LE630E,RU)
4. Remove the 6 lock screws and detach the POWER SUPPLY Unit and Insulator Sheet .
5. Remove the 2 lock screws and detach the Speaker (Sub Woofer) .
6. Remove the 16 lock screws and detach the Center Angle-L , Center Angle-R .
7. Detach the 14 Fixing Metal Angles .
8. Remove the 8 Hooks and detach the 60” LCD Panel Module Unit .
9. Remove the 1 lock screw and detach the ECO-SW .
7 Insulator Sheet
Main PWB Shield
Hook
Hook
Hook
Hook
12
Fixing Metal
Angle
12
Fixing Metal
Angle
12
13
13
13
13
Fixing Metal
Angle
12 Fixing
Metal Angle
12 Fixing
Metal Angle
60" LCD Panel
Module Unit
Module Unit
14
12 Fixing
Metal Angle
12
Fixing
Metal Angle
Metal Angle
9
9
11 Center
Angle-R
10 Center
Angle-L
8
Speaker
(Sub Woofer)
[SB]
6
POWER SUPPLY Unit
5
3
Terminal
Angle Bottom
4
MAIN Unit
1
15
2
17
16
20 Earth Spring
18
19 ECO-SW
[AS]