Read Sharp LC-52XL2E (serv.man13) Technical Bulletin online
LCD 2010 05 02
Date of Issue:
15
th
May 2010
Classification: White
LCD TELEVISION TECHNICAL BULLETIN
Page 2 of 2
Sharp Electronics (UK) Limited
Reference – LV317
Revision - 2
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
Figure 3: Each sheet has the lower R.H. corner cut-off for easy assembly.
Please Note.
The opening of the LCD panel assembly needs to be done in a clean/dust free
enviroment.
The replacement sheets have a front and rear. It is important that all sheets are
assembled with their cut-off, shown in Figure 3 to the R.H. lower corner of the panel
assembly as this will ensure they are assembled correctly.
assembly as this will ensure they are assembled correctly.
The replacement lens sheets have no protection film and are assembled as supplied.
The panel layers should be handeled with great care and only held at their edges and
only when being assembled.
allow dirt/dust containation.
Before final assembly please complete a lighting test to ensure nothing is trapped
within or has containated the sheets.