LC-52XD1E (serv.man12) - Sharp TV User Guide / Operation Manual. Page 6

Read Sharp LC-52XD1E (serv.man12) User Guide / Operation Manual online

 
4
Bundle the AC 
cord with the 
clamp (small).
Quick guide
Setting the TV
Standard DIN45325 
plug (IEC 169-2)
75 
q coaxial cable
Antenna
Connect the antenna cable from your antenna-/cable socket or the (room-/roof) antenna for antenna input terminal on the 
back of your TV set to receive digitally/terrestrially broadcast stations.
An indoor antenna can also be used under good reception conditions. Passive and active room antennas are offered 
commercially. In an active antenna its power is supplied via the antenna input terminal.
The supply voltage (5V) must be correspondingly set under “Supply voltage”. (Page 16)
* Ferrite Core
The Ferrite Core should be permanently attached and never removed from the AC cord.
Setting the TV on the wall
•  This TV should be mounted on the wall only with the wall mount bracket available from SHARP. (See page 36.) 
The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
  Installing the LCD Colour TV requires special skill that should only be performed by qualifi ed service personnel. 
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting 
or mounting that results in accident or injury.
•  You can ask a qualifi ed service personnel about using an optional bracket to mount the TV to the wall.
AC 
cord
Product shape 
varies in some 
countries.
Cable clamp (small)
Cable tie
Place the TV close to the 
AC outlet, and keep the 
power plug within reach.
Ferrite 
Core *
Cable 
clamp 
(large)
Bundle  the 
cables with 
the clamp.
Page of 42
Display

Click on the first or last page to see other LC-52XD1E (serv.man12) service manuals if exist.