Read Sharp LC-52LE831E (serv.man13) User Guide / Operation Manual online
66
Replacing the button cell battery
The battery has an expected service life of
approximately 75 hours.
• When the battery power is low, the LED light blinks six
times after the power is turned on.
• When replacing the button cell, use only the designated
battery type (Hitachi Maxell: CR2032 lithium button cell).
1
Loosen the screw used to secure the battery
cover, and then remove the battery cover.
2
1
2
Remove the button cell battery.
1
Place the tip of the slotted precision
screwdriver into the opening between the
button cell and the socket.
2
Lift up the button cell while taking care not
to get the screwdriver caught on the metal
latch.
2
1
3
When the battery comes loose from the socket,
pick it out with your fingers.
4
Hook a new button cell to the metal latch and
insert it into the socket.
• Take care not to reverse the battery polarity (e and
f) when inserting the button cell.
5
Close the battery cover.
2
1
6
Insert the screw to secure the battery cover.
NOTE
• Refer to page 6 for details of battery disposal.
• Used batteries should be disposed in accordance with
local laws and regulations.
Using the 3D glasses
Turn on/off the power
1
Turn on the power of the 3D glasses.
• Press the power button for at least two seconds.
• The LED light blinks three times.
2
Turn off the power of the 3D glasses.
• Press the power button for at least two seconds.
• The LED light lights for two seconds.
NOTE
• When the battery power is low, the LED light blinks six
times after the power is turned on.
Switching between 2D and 3D
modes
modes
When viewing 3D images, you can press the power
button to switch between 2D and 3D modes. This is
useful when several people are viewing 3D images
on the same TV with some people wanting to watch
in 3D and some people wanting to watch in 2D.
E
Viewing 2D images
When you press the power button twice while
viewing 3D images, the LED light blinks two times
and the 3D images switch to 2D images.
E
Viewing 3D images
When you press the power button twice while
viewing 2D images, the LED light blinks three times
and the 2D images switch to 3D images.
Enjoying 3D image viewing
Click on the first or last page to see other LC-52LE831E (serv.man13) service manuals if exist.