Read Sharp LC-52DH66E (serv.man9) User Guide / Operation Manual online
LC-52DH65E/S, LC-52DH66E
1 – 4
Confirm that there are 8 screws (4 short screws
and 4 long screws) with the stand unit.
and 4 long screws) with the stand unit.
Attach the supporting post for the stand unit
onto the base using the 4 long screws with the
hex key (supplied) as shown.
onto the base using the 4 long screws with the
hex key (supplied) as shown.
1
2
Inserting the stand.
Insert the stand into the openings on the
bottom of the TV (Hold the stand so it will
not drop from the edge of the base area).
bottom of the TV (Hold the stand so it will
not drop from the edge of the base area).
Insert and tighten the 4 short screws into
the 4 holes on the rear of the TV.
the 4 holes on the rear of the TV.
3
1
NOTE
To detach the stand unit, perform the steps in reverse
order.
order.
Attaching the stand unit
Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent
it from being damaged.
Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent
it from being damaged.
CAUTION
Attach the stand in the correct direction.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Long
screw
screw
Short
screw
screw
Hex key
Supporting
post
Soft
cushion
cushion
Hex key
2
Click on the first or last page to see other LC-52DH66E (serv.man9) service manuals if exist.