LC-50LE771K (serv.man2) - Sharp TV User Guide / Operation Manual. Page 27

English   - 26 -

Your TV is capable of finding and updating automatically 

via the Aerial/Cable/Satellite(depends on the model) 

signal or over the Internet. 

Simply navigate on your main menu. Choose 

Settings 

and select 

Other Settings menu. In Other Settings 

menu navigate on to the 

Software for Upgrade item and 

press 

OK button to check for a new software upgrade. 

Note : Internet connection is needed. If an internet 

connection is not available, try to upgrade via 

broadcast. If a new upgrade is found, it starts to 

download the upgrade. Press 

OK to continue with 

the reboot operation.

While the TV is connected to an aerial signal. If 

Automatic scanning in the Upgrade Options menu 

is enabled, the TV wakes up at 03:00 and searches 

broadcast channels for new software upgrades. If 

new software is found and downloaded successfully, 

the next time the TV powers up , it will have the new 

software version.

Please note that ghosting may occur while displaying 

a persistent image (still or paused image). LCD TVs’ 

image persistence may disappear after a short time. 

Try turning off the TV for a while. To avoid this, do not 

leave the screen in still picture mode for extended 

periods.

If your TV has no power, please check the power cord 

plug is connect to the mains power socket.

External influences such as lightning, static electricity, 

etc., may cause improper operation. In this case, 

operate  the TV  after  first  turning  off  the  power,  or 

unplugging the AC cord and re-plugging it in after 

one or two minutes.

1. Have you selected the correct TV system? 
2. Is your TV or house aerial located too close to a  

non-earthed audio equipment or neon lights, etc.?
3.  Mountains or high buildings can cause double 

pictures or ghost images. Sometimes you can improve 

the picture quality by changing the direction of the 

aerial. Is the picture or teletext unrecognisable? 
4. Check if you have entered the correct frequency. 
5. Please retune the channels. 

6. The picture quality may degrade when two devices 

are connected to the TV at the same time. In such a 

case, disconnect one of the devices.

1. No Picture means that your TV is not receiving a 

transmission. Have you selected the correct button on 

the remote control? Try once more. Also make sure 

the correct input source has been selected.
2. Is the aerial connected properly? 
3. Are the plugs connected tightly to the aerial socket?
4. Is the aerial cable damaged? 
5. Are suitable plugs used to connect the aerial? 
6. If you are in doubt, consult your dealer.
Strange, light, dark colour or colour misalignment
• Adjust the picture settings. Press the 

MENU button 

and select 

Picture. Press OK to open the Picture 

Settings menu.

• Is the room too bright? The picture may look dark in 

a room that is too bright.

1. Has the TV been set to mute? To cancel mute, 

press the “ ” button, or increase the volume level.
2.  Sound is coming from only one speaker. Is the 

balance set to one extreme? See Sound Menu 

section.

Your TV no longer responds to the remote control. The 

batteries may be exhausted, if so you can still use the 

control buttons on the TV.  (* Is only possible if they 

are not blocked by parental control.)

• The TV’s internal temperature has increased. 

Remove any objects blocking the vent or clean.

• Is a sleep timer set? 

Press the 

MENU button and 

select 

Settings. Select Timers in the sub-menu 

and press 

OK. Press Left or Right button to set the 

Sleep Timer as Off

.

• Is 

Auto TV OFF function is activated? Press the 

MENU button and select Settings. Than select Other 

Settings and press OK. In the sub-menu highlight 

Auto TV OFF and press Left or Right button to set 

as 

Off.

1. If you cannot select an input source, it is possible 

that no device is connected.
2. Check the AV cables and connections if you have 

tried to connect a device.

To  record  a  programme,  you  should  first  connect 

a USB disk to your TV while the TV is switched