Read Sharp LC-50LE761K Service Manual online
30
LC-42/50LE762
LC-42/50LE761
LC-42/50LE760
55
F. USB Problems
Problem: USB is not working or no USB Detection.
Check USB Supply, It should be nearly 5V. Also USB Enable should be logic high.
G. No Sound Problem
Problem: No audio at main TV speaker outputs.
Check supply voltages of 24V VDD_AUDIO, 3.3V AUDIO_AVDD and AUDIO_DVDD
with a voltage-meter. There may be a problem in headphone connector or headphone detect
circuit (when headphone is connected, speakers are automatically muted). Measure voltage at
HP_DETECT pin, it should be 3.3v.
56
H. Standby On/Off Problem
Problem: Device can not boot, TV hangs in standby mode.
There may be a problem about power supply. Check main supplies with a voltage-meter. Also
there may be a problem about SW. Try to update TV with latest SW. Additionally it is good
to check SW printouts via Teraterm. These printouts may give a clue about the problem. You
can use Scart-1 for terraterm connection.
I. No Signal Problem
Problem: No signal in TV mode.
Check tuner supply voltage; 5V_VCC, 3V3_TUNER and 1V8_TUNER. Check tuner options
are correctly set in Service menu. Check AGC voltage at IF_AGC pin of tuner.
7. No Sound problem
8. Standby On/Off Problem
Click on the first or last page to see other LC-50LE761K service manuals if exist.