Read Sharp LC-46LU700E (serv.man2) Handy Guide online
Unit Rest Procedures
Version 1.1
Issue 07/2010
14
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Entering and exiting the adjustment process mode
1. Unplug the AC power cord of running TV set to force off the power.
2.
While holding down the “VOL (-)” and “INPUT” keys on the set at once, plug in the AC
power cord to turn on the power.
The letter “K” appears on the screen.
power cord to turn on the power.
The letter “K” appears on the screen.
3.
Next, hold down the “VOL (-)” and “P (DOWN)” keys on the set at once.
Multiple lines of blue characters appearing on the screen indicate that the set is now
in the adjustment Process mode.
If you fail to enter the adjustment process mode (the display is the same as normal
startup), retry the procedure.
Multiple lines of blue characters appearing on the screen indicate that the set is now
in the adjustment Process mode.
If you fail to enter the adjustment process mode (the display is the same as normal
startup), retry the procedure.
4. To exit the adjustment process mode after the adjustment is done, unplug the AC
power cord to force off the power. (When the power is turned off with the remote
controller, once unplug the AC power cord and plug it in again. In this case, wait 10
seconds or so before plugging.)
controller, once unplug the AC power cord and plug it in again. In this case, wait 10
seconds or so before plugging.)
Click on the first or last page to see other LC-46LU700E (serv.man2) service manuals if exist.