LC-46LE700E (serv.man14) - Sharp TV User Guide / Operation Manual. Page 26

“100 Hz” technology provides superior solutions for 
digital display picture quality removing motion blur.

This effect is greater on fast moving images.
“100 Hz” will have no effect in the following cases.
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
3) Teletext is activated.
If images appear blurred, set the “100 Hz” to “Off”.

Automatically detects a film-based source (originally 
encoded at 24 or 25 frames per second, depending on 
the vertical frequency), analyses it and then recreates 
each still film frame for high-definition picture quality 
(“Advanced (High)”, “Advanced (Low)”, “Standard”, “Off”).

Automatically adjusts the contrast of an image according 
to the scene.

Selects the tone difference of the brightness and 
darkness of the image according to the type of 
programme watched from a maximum of 

e 2 to a 

minimum of 

f 2.

“DNR” produces a clearer image (“Off”, “High”, “Middle”, 
“Low”, “Auto”).

This function may not be available depending on the input 
signal type.

Provides high quality images with minimal dot crawl and 
cross colour noise by detecting changes in the image.

Normal adjustment.

Sets the optimum image quality for fast-
moving images.

Sets the optimum image quality for 
slow-moving images.

“3D-Y/C” may not operate depending on the input signal type 
or when the input signal is noisy.
“3D-Y/C” has even more effect on composite video signals 
(CVBS).

For viewing a video in black & white.

•
•

•

•

•

•

The brightness level range of the OPC sensor’s automatic 
adjustments can be set according to your preferences. 
The adjustment range of the OPC sensor can be set to a 
maximum of 

e 16 and a minimum of f 16.

This function is available only when the “OPC” setting is set to 
“On” or “On:Display”.
The maximum setting cannot be set to a smaller number than 
the minimum setting.
The minimum setting cannot be set to a bigger number than 
the maximum setting.
The maximum and minimum settings cannot be set to the 
same number.
Depending on the brightness of the surrounding light, the OPC 
sensor might not operate if the adjustment range is small.

“AV MODE” gives you several viewing options to choose 
from to best match the system environment, which 
can vary due to factors like room-brightness, type of 
programme watched or the type of image input from 
external equipment.

Press 

#.

Each time you press 

#, the mode 

changes.

You can also switch the mode on the “Picture” and 
“Audio” menu screen by pressing 

#.

For a highly defined image in a normally 
bright room.

For viewing a movie in a darkened room.

For playing of video games.

For PC.

Allows you to customise settings as 
desired. You can set the mode for each 
input source.

For a clear-cut image emphasising 
high contrast for sports viewing (the 
“Picture” and “Audio” settings cannot 
be adjusted).

For a clear-cut image emphasising high 
contrast for sports viewing.

The TV automatically sets the 
appropriate selection from the “AV 
MODE” menu depending on the lighting 
conditions and the type of programme 
watched.

The item marked with * is available only when selecting “HDMI 
1”, “HDMI 2”, “HDMI 3”, “HDMI 4” or “EXT 4” from the “INPUT 
SOURCE” menu.
If you select “AUTO”, some selections in the “AV MODE” menu 
may not be automatically set.

•

•

•

•

•

•

•

•

LC-LE700E_GB.indd   24

LC-LE700E_GB.indd   24

2009/07/13   14:51:34

2009/07/13   14:51:34