Read Sharp LC-46LE631E (serv.man10) Technical Bulletin online
LCD 2012 01 04
Date of Issue: 27
th
January 2012
Classification: White
LCD TELEVISION TECHNICAL BULLETIN
Page 2 of 2
Sharp Electronics (UK) Limited
Reference – SP113900X
Revision - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
B. To update eUM and Main Software versions:
1. Access the technical web site and find the latest software version.
2. On the root of a USB pen drive, create a folder called "upgrades" and a folder called
"dfu"
3. Extract the downloaded file, there will be 3 files.
4. Copy the 2 x .upg files to the folder "upgrades"
5. Extract the file "Electronic Manual"
6. Copy "CopyDfuContent.upg" to the folder "upgrades"
7. Extract content of “EuM LE630 Series R2.zip” and put the content in the USB folder: USB
root\dfu\
8. Turn off the TV and connect USB stick.
9. Hold “OK” key on RC-transmitter and turn ON the main power switch on TV set. The
following menu will appear (see photo 3).
1. Access the technical web site and find the latest software version.
2. On the root of a USB pen drive, create a folder called "upgrades" and a folder called
"dfu"
3. Extract the downloaded file, there will be 3 files.
4. Copy the 2 x .upg files to the folder "upgrades"
5. Extract the file "Electronic Manual"
6. Copy "CopyDfuContent.upg" to the folder "upgrades"
7. Extract content of “EuM LE630 Series R2.zip” and put the content in the USB folder: USB
root\dfu\
8. Turn off the TV and connect USB stick.
9. Hold “OK” key on RC-transmitter and turn ON the main power switch on TV set. The
following menu will appear (see photo 3).
Photo 3: Version of updating software.
10. Select file “CopyDfuContent_prod.upg” to install, as in the above photo, and confirm.
11. When the first upgrade had been done press “
11. When the first upgrade had been done press “
◄” on the RC-transmitter and then select
other file “FUS_S5551_0.14.81.0_prod.upg” or upper and confirm.
12. When the first upgrade had been done press “◄” on the RC-transmitter and then select
the other file “StandbySW_S5551_CFG167_89.0.5.0.upg” or lower and confirm.
the other file “StandbySW_S5551_CFG167_89.0.5.0.upg” or lower and confirm.
13. Reboot the set and it’s done.
C. Check the upgrade and TV working:
1. Check that both software versions have been upgraded (Version may differ to shown).
1. Check that both software versions have been upgraded (Version may differ to shown).
2. Check that TV set is working properly.
Display