LC-45GD1E (serv.man47). Using memory card, Using external equipment, Useful adjustment settings - Sharp TV User Guide / Operation Manual. Page 22

• Some input signals may have to be registered manually

to display properly.

• The pairs of input signals (resolutions) in the list below

are not distinguishable when received. In such case, you
have to set the correct signal manually. After setting once,
it will display when the same signal (resolution) is input
again.

Press MENU and the MENU screen displays.

Press a/b to select “Input Signal” and then
press OK.

Press a/b to select the desired input signal
on the display.

720g400

848g480

1280g768

640g400

640g480

1024g768

• You can only select the “Input Signal” on the Setup menu

when receiving one of the 6 input signals listed above.

Press c/d to select “Setup”.

Produces a clearer video image.

Press MENU and the MENU screen displays.

Press c/d to select “Option”.

Press a/b to select “3D-NR”, and then press
OK.

• Some items may be greyed out. They are not

selectable.

Press a/b to select the desired level (Off,
High, Low), and then press OK.

Repeat steps 1 to 2 in 3D-NR.

Press a/b to select “Quick Shoot”, and then
press OK.

Press  c/d to select “On”, and then press
OK.

• Quick Shoot may cause image noise. If this occurs, turn

the function “Off”.

Improves LCD response when viewing fast-moving
images. The effect is greater at low room temperatures
(at or below 15˚C/59˚F).

You can set the orientation of the picture.

Repeat steps 1 to 2 in Input signal (PC input
mode only).

Press a/b to select “Rotate”, and then press
OK.

[Normal]: normal image.

Press a/b to select the desired mode, and
then press OK.

Normal

Mirror

Upside Down

Rotate

[Mirror]: mirror image.

[Upside Down]: upside

down image.

[Rotate]: rotated image.

LC-45GD1E(E)-k

04.9.27, 10:23 AM

71