Read Sharp LC-42LE40E (serv.man3) User Guide / Operation Manual online
Quick guide
6� Start searching channels
Initial Setup
Channel Scan
First, please connect
antenna.
Next
Select
Back
Skip Scan
0 %
Scan
Exit
EXIT
Start channel scan now?
If you skip this setup, the
If you skip this setup, the
channel scan could be
performed in Menu.
Initial Setup
Channel Scan
The channel scan may take
a while to complete.
10 %
Cancel
EXIT
Status: Scanning.
Analogue Channels: 0
When selecting
Analogue and Digital, the following
screen will appear.
Initial Setup
Channel Scan
The channel scan may take
a while to complete.
10 %
Cancel
EXIT
Status: Scanning.
Analogue Channels: 0
Digital Channels: 0
Tuner mode setting
Additional Information about Scan Mode
•
Quick search method offers the fastest channel scan.
• Advanced search method works only in countries with
broadcasting according to the LCN standard (e.g. UK
and FRANCE).
and FRANCE).
• Full search method takes a long time (depending on
network situation, about 1 hour).
Radio channel sorting
• Auto sorting will store radio stations from program
no. 1001 onwards in countries without broadcasting
according to the LCN standard.
according to the LCN standard.
Watch TV
Congratulations! Now you can watch TV.
Initial Setup
Completed
Congratulations !!
Completed Initial setup
Please press [OK] to exit
the wizard.
Back
Exit
OK
If necessary, adjust the antenna to attain
maximum signal reception.
3
3� Mode select (TV location setting)
Initial Setup
Mode select
Please select your mode
SHOP
Next
Select
Back
HOME
Exit
EXIT
When selecting
HOME mode, go to step 4 to select
the scan mode.
When selecting
When selecting
SHOP mode, a window pops out to
ask your confirmation.
4� Scan Mode setting
Initial Setup
Scan Mode
Please select your scan
mode
Analogue and Digital
Next
Select
Back
Analogue
Exit
EXIT
When selecting
Analogue, go to step 6 to start
channel scan.
Initial Setup
Scan Mode
Please select your scan
mode
Analogue and Digital
Next
Select
Back
Analogue
Exit
EXIT
When selecting
Analogue and Digital, the Tuner
Mode screen will appear. Select the Tuner mode.
5� Tuner Mode setting
Initial Setup
Tuner Mode
Please select your tuner
mode
Cable
Next
Select
Back
Antenna
Exit
EXIT
When selecting
Antenna, go to step 6 to start
channel scan.
Initial Setup
Tuner Mode
Please select your tuner
mode
Cable
Next
Select
Back
Antenna
Exit
EXIT
When selecting
Cable, the Scan Mode configuration
screen will appear.
Please configre the cable
info.
Initial Setup
Scan Mode
Frequency (KHz)
Modulation
Symbol Rate (Ksym/s)
Network ID
Frequency (KHz)
Modulation
Symbol Rate (Ksym/s)
Network ID
Full
64QAM
474000
Exit
EXIT
Select
/
Next
OK
6875
999
Back
MENU
8
Click on the first or last page to see other LC-42LE40E (serv.man3) service manuals if exist.