LC-42LE40E (serv.man3) - Sharp TV User Guide / Operation Manual. Page 25

E 

Decoder

E 

Full SCART, which transmits RGB, S-Video and CVBS

in, and CVBS tuner out.

32”
42”

•  In cases when the decoder needs to receive a signal

from the TV, make sure to select the appropriate input
source.

E

R

L

AUDIO IN

32”
42”

In order to receive coded digital stations, a conditional

access module (CA module) and a Smartcard must be

inserted in the CI (Common Interface) slot of the TV.

The CA Module and the Smartcard are not supplied

accessories. They are usually available from your

dealer.
Inserting the Smartcard into the CA Module

Carefully insert the CA module in the CI slot 

with the contact side forward.

The logo on the CA module must be facing 

outward from the rear of the TV.

•  It takes about 30 seconds to certify the license key

when you insert a Smartcard into the CI+ compatible
CA module for the first time. This process may fail when
there is no antenna input or you have never run “Auto
installation”.

•  The CI+ compatible CA module sometimes upgrades

its firmware. You may not receive any TV images before
upgrading. You can only use the power button during
upgrading.

•  The CI+ compatible CA module does not allow you to

output any copy protected programmes using monitor
out.

•  If the TV displays an update confirmation message

for the Smartcard while receiving CI+ compatible
broadcasts, follow the screen prompts.

•  Make sure that the CA module is properly inserted.

After inserting and activating the CA Module, make

sure the input source is

TV.

Press 

MENU on the remote control.

Go to 

Features > Common Interface.

•  This menu is only available for digital stations.
•  The content of this menu depends on the provider of the

CA module.

General information on CA module displays.

Adjustment parameters of each Smartcard displays.

You can input numerical values such as passwords here.

Digital audio in

(COAXIAL)

Digital audio cable

Audio cable

SCART cable