Read Sharp LC-42LE40E (serv.man3) User Guide / Operation Manual online
E
Select a subtitle language on digital TV
channels
channels
When you select a subtitle language on a digital TV
channel as described below, the preferred subtitle
language set in the
TV menu is temporarily overruled.
1�
Press
MENU on the remote control and select
Features > Subtitle�
2�
Press
OK or ≥ to enter Subtitle.
3�
Press <> to select
1st Subtitle or 2nd
Subtitle.
4�
Highlight your selection and press ≤≥ to select
a subtitle language.
5�
Follow the on-screen instructions to exit.
NOTE
• If your selected subtitle language is not broadcast, the
default language subtitle will be displayed.
• If the
1st Subtitle language you selected is not
available, the
2nd Subtitle language will be displayed.
E
Select Hearing impaired subtitle
When watching channels with hearing impaired service,
you can enable the subtitle commentary for the hearing
handicapped. For digital channels only.
1�
Press
MENU on the remote control and select
Features ≥ Subtitle.
2�
Press
OK or ≥ to enter Subtitle.
3�
Press <> to select
Subtitle Type.
4�
Press ≤≥ to select
Hearing impaired as your
subtitle type.
5�
Follow the on-screen instructions to exit.
Teletext language
You can select Teletext Language when the TV receives
Teletext signals broadcast by a TV network. (See page
11.)
Common Interface
This function enables you to watch encrypted services
(pay services). (See page 25.)
NOTE
• This functions may not work depending upon the
country broadcasting circumstances.
TV menu
HDMI overscan
When you watch TV via HDMI input source, you could
use this function to enlarge the picture. It may have few
loss of video content.
1�
Press
MENU on the remote control and select
Features > HDMI Scan info
2�
Press ≤≥ to select one of the following:
• Select
Auto to scan the picture automatically.
• Select
Underscan to disable.
• Select
Overscan to activate.
3�
Follow the on-screen instructions to exit.
Manual OAD Download
When you get the software updating news from the
retailer or internet, you can update the operation
software using the OAD (Over Air Download)
Download. The updated software data will be
transferred through the TV signal.
1�
Press
MENU on the remote control and select
Features ≥ OAD ≥ Manual OAD Download.
2�
Press
OK or ≥ to enter.
3�
Follow the on-screen instructions to download
the updated software.
NOTE
• Please do not switch off the TV during the downloading
process.
Searching for updates*
*All countries except UK,Sweden and Italy are set to
“No”for this function.
The TV automatically determines whether a new
software version is available when the TV is in standby
mode.
Item
Description
Yes
Automatically searches for new software
updates available when the TV is in standby
mode.
No
Does not search for update information.
No Signal Off
When set to “On”, the TV will automatically enter
standby mode if there is no signal input for 15 minutes.
NOTE
NOTE
• Even if a TV programme finishes, this function may not
operate because of interference from other TV stations
or other signals.
or other signals.
19
Click on the first or last page to see other LC-42LE40E (serv.man3) service manuals if exist.