LC-42CT2E (serv.man3) - Sharp TV User Guide / Operation Manual. Page 20

English   - 20 -

Set Language item by pressing  “ ” or “ ” button. 
Press “ ” or “ ” button to highlight Country item and 
then use “ ” or “ ” to set. Press “ ” or “ ” button to 
highlight TXT Language. Select a region by using “ ” 
or “ ”  button. When fi nished, press OK or RED button 
to continue. To cancel, press the BLUE button.

After APS is fi nalized, the programme table will appear 
on the screen. In the programme table you will see 
the programme numbers and names assigned to the 
programmes.

In Manual Search, the number of the multiplex is entered 
manually and only that multiplex is searched for the 
channels. For every valid channel number, signal level 
and signal quality  are shown on the screen.
In both manual and auto search any existing channel 
in the database is not re-stored to avoid redundant 
duplicates of that channel.

The user can use this item to load default settings, 
which were loaded to the receiver at the factory. 
To install factory settings, highlight “First Time 
Installation” menu item and press OK button, then 
you will be asked whether or not to delete the settings. 
Selecting “Yes” by pressing OK button while the “Yes” 
is highlighted, will delete the existing channel table.

After factory settings are loaded, a message asking 
for automatic search appears on the screen:

Highlight “Yes” item by pressing “ ” or “ ” buttons 
and press OK button to start installation. After search 
is completed for digital channels, a message asking 
whether to search for analogue channels appears 
on the screen. This process is same as described in 

Automatic Search section.

For your viewing requirements, you can set the related 
mode option.
Press “ ” or “ ” button to select Mode. Press “
” or “ ” button to choose from one of these options: 
Natural, Cinema and Dynamic.. 

Press “ ” or “ ” button to select the desired option. 
Press “ ” or “ ” button to set the level.

Press “ ” or “ ” button to select Colour Temp. 
Press “ ” or “ ” to choose from one of these options: 
Normal, Warm and Cool..

Note: 
• For normal colours, select Normal option.
• Setting Warm option gives white colours a slight red 
stress.
• Setting Cool option gives white colours a slight blue 
stress.

If the broadcast signal is weak and the picture is 
noisy, use Noise Reduction setting to reduce the 
noise amount.

A01_MB38_[GB]_3920UK_IDTV-T2_GOLD7_42883W_10067819_50165225.indd   20

A01_MB38_[GB]_3920UK_IDTV-T2_GOLD7_42883W_10067819_50165225.indd   20

26.03.2010   16:01:15

26.03.2010   16:01:15