Read Sharp LC-42CT2E (serv.man2) Service Manual online
Figure 1. The Sample Output Before Sending The File
2. EEProm update
To Update eeprom content via uart scart,dsub9 or i2c with Mstar tool can used.
Serial connection settings are listed below:
Serial connection settings are listed below:
-
Bit per second: 9600
-
Data bits: 8
-
Parity: None
-
Stop bits: 1
-
Flow control: None
Programming menu item is choosed in the service menu and switch “HDCP Key Update
Mode” from off to on.
Mode” from off to on.
Click on the first or last page to see other LC-42CT2E (serv.man2) service manuals if exist.