LC-42AD5E (serv.man5). Major IC Informations - Sharp TV Service Manual (repair manual)

lc-42ad5e (serv.man5) service manual
Model
LC-42AD5E (serv.man5)
Pages
21
Size
1.18 MB
Type
PDF
Document
Service Manual
Brand
Device
TV / LCD / Major IC Informations
File
lc-42ad5e-sm5.pdf
Date

Read Sharp LC-42AD5E (serv.man5) Service Manual online

LC-42AD5E/RU/S
5 – 1
LC-42AD5EB
Service Manual
 
CHAPTER 5. 
MAJOR IC INFORMATIONS
[1] MAJOR IC INFORMATIONS
1. MAJOR IC INFORMATIONS
1.1. IC202 (RH-iXB964WJZZQ)
The STv0362 is a single-chip demodulator using COFDM (coded orthogonal frequency division Multiplexing) and is intended for digital terrestrial
receivers using compressed video, sound and data services. It converts IF or base band differential signals to MPEG-2 format by processing OFDM
carriers.
The STv0362 is fully compliant with the DVB-T specification (ETS 300 744) and Nor Dig Unified specification.
1.2. IC201 (VHiTDA9886+-1Y)
The TDA9886 is an alignment-free multi standard (PAL, SECAM and NTSC) vision and sound IF signal PLL demodulator for positive and negative
modulation including sound AM and FM processing.
1.3. IC3002 (RH-iXB624WJN1Q)
The RH-iXB624WJN1Q provides a front-end video processing unit with 3 CVBS-Y/C or component inputs for HDTV.
The following 6 major functions are included:
1) Audio Processing
2) Video Processing
3) Motion Adaptive Upconversion
4) Scaling, Display Processing
5) Unified memory for Audio, Video and Text Control, 3D Comb filter PC Connectivity
6) Controlling, OSD and Text
1.4. IC3003 (RH-iXB664WJZZY)
This IC is based on LCD Driver and nano Watt Technology and is RISC microprocessor to control peripheral functions necessary for the system con-
figuration.
In this equipment, the R/C LED on the AVC side and system on the display side are controlled.
1.5. IC1710 (RH-iXB823WJZZQ)
This IC is F.P.G.A. (Field Programmable Gate Arrays) for signal selector and synchronous processing of each digitalized input signal.
This IC functions as extended I/O of the main microcontroller and controls timing of bus signals among ICs, etc.
1.6. IC1905 (VHiSii9025+-1Q)
The Sii9025 is a compliant with the latest HDMI 1.2 (High Definition Multimedia Interface) specification.
Backward compatibility with DVI 1.0 allows HDMI systems to connect to existing DVI 1.0 hosts.
The SiI9025 is capable of receiving and outputting two channel digital audio at up to 192 kHz- an excellent solution for Digital TVs.
An S/PDIF port supports up to 192 kHz audio.
The SiI9025 also comes pre-programmed with HDCP keys, greatly simplifying the manufacturing process, while providing the highest level of HDCP
key security.
1) Dual-Input HDMI 1.2, HDCP 1.1 and DVI 1.0 compliant receiver.
2) Integrated TMDSR core.
3) Digital video interface supports video processors:
• 24-bit RGB/YCbCr 4:4:4
• 16/20/24-bit YCbCr 4:2:2
• 8/10/12-bit YCbCr 4:2:2 (ITU BT.656)
• 12-bit DMO (Digital Multimedia Output) RGB/YCbCr 4:4:4 (clocked with rising & falling edges)
• Color Space Conversion for both RGB-to-YCbCr and YCbCr-to-RGB (both 601 and 709)
• Auto video mode configuration simplifies system firmware design.
4) Digital audio interface supports high-end audio systems:
• One programmable I2S output for connection to low-cost DACs at 32-192kHz.
• S/PDIF output supports PCM, Dolby Digital, DTS digital audio transmission (32-192 kHz Fs) using IEC60958 and IEC61937.
• Auto audio error detection with programmable soft mute.
5) Integrated HDCP decryption engine for receiving protected audio and video content.
6) HDCP Built in Self Test (BIST) lowers cost to test HDCP operation.
LC-42AD5E/RU/S
5 – 2
7) Pre-programmed HDCP keys provide highest level of key security, simplifies manufacturing.
1.7. IC301/302 (VHiTDA8931T-1Y)
The TDA8931 is a switching power stage for high efficiency class-D audio power amplifier systems.
With this amplifier a compact 1x 20 W closed loop self-oscillating digital amplifier system can be built.
The audio output of LC-37AD5E are set to 10W, respectively.
1.8. IC4203 (RH-IXC100WJZZQ)
This IC is a high performance CMOS super technology 16Mbit Flash Memory.
Start software (loader) for the CPU with a built-in digital processor and application software have been written on this Flash Memory.
The digital processor reads these soft wares on start-up and implements them.
1.9. IC4201/4202 (RH-iXB742WJZZQ)
This IC is 64Mb SDRAM (static dynamic random-access memory) IC.
In this equipment, it is used for SMI memory (for image processing), and data is used for operation of the digital processor.
1.10. IC4001 (RH-IXB680WJZZQ)
This is a video/ audio signal processing IC (Digital Processor) (STi5516) for digital tuner, which has been manufactured by ST Microelectronics, and
incorporates a CPU.
In this equipment, it implements GUI processing and video/audio processing for digital tuner, negotiation processing with CI-CARD, etc.
LC-42AD5E/RU/S
5 – 3
2. Detailed ICs Information
2.1. IC201 (VHiTDA9886+-1Y)
2.1.1 Block Diagram
2.1.2 Pin Connections and short description
Pin No.
Pin Name
I/O
Pin Function
1
VIF1
I
VIF differential input1
2
VIF2
I
VIF differential input2
3
OP1
O
Output1 (open-collector)
4
FMPLL
FM-PLL for loop filter
5
DEEM
O
De-emphasis output for capacitor
6
AFD
I
AF decoupling input for capacitor
7
DGND
Digital ground
8
AUD
O
Audio output
9
TOP
Tuner AGC TakeOver Point (TOP)
10
SDA
I/O
I2C-bus data input/output
11
SCL
I
I2C-bus clock input
12
SIOMAD
O
Sound intercarrier output and MAD select
13
N.C
Not connected
14
TAGC
O
TAGC14tuner AGC output
15
REF
I
4MHz crystal or reference input
16
VAGC
VIF-AGC for capacitor
17
CVBS
O
Video output
18
AGND
Analog ground
19
VPLL
VIF-PLL for loop filter
20
VP
Supply voltage (+5 V)
21
AFC
O
AFC output
22
OP2
O
Output2 (open-collector)
23
SIF1
I
SIF differential input1
24
SIF2
I
SIF differential input2
LC-42AD5E/RU/S
5 – 4
2.2. IC202 (RH-iXB964WJZZQ)
2.2.1 Pin Connections and short description
Pin No.
Pin Name
I/O
Pin Function
Clock and resets
32
NOT_RESET
I
Hardware reset, active low
15
XTAL_I
I
Analog Crystal oscillator input/external clock (2.5 V)
14
XTAL_O
O
Analog Crystal oscillator output
13
VDDA_2V5
Supply Analog oscillator supply (2.5 V)
16
VDDA_2V5
Supply Analog PLL supply (2.5 V)
Analog interface
1
RF_LEVEL
ADC 8 input for RF level monitoring
2
VDDA_2V5
Analog ADC 8 supply (2.5 V)
3
QP
Positive Q analog input for baseband configuration
4
QM
Negative Q analog input for baseband configuration
5
VDDA_ISO
Analog ISO nwell polarization (2.5 V)
6
VDDA_2V5
Analog ADC 12 supply (2.5 V)
7
REFP
Internal positive reference
8
REFM
Internal negative reference
9
INCM
Internal common mode
10
IM
Negative I analog input for IF and baseband configuration
11
IP
Positive I analog input for IF and baseband configuration
12
VDDA_1.0
Analog supply (1.0 V)
I2C interface
29
SDA
I/O
Serial data (open drain)
30
SCL
I
Serial clock (open drain)
21
SDAT
I/O
SDA tuner (open drain)
20
SCLT
I
SCL tuner
MPEG interface
43
D7
O
Serial MPEG data or parallel MPEG data (bit 7)
42
D6
O
Parallel MPEG data (bit 6)
40
D5
O
Parallel MPEG data (bit 5)
39
D4
O
Parallel MPEG data (bit 4)
37
D3
O
Parallel MPEG data (bit 3)
36
D2
O
Parallel MPEG data (bit 2)
35
D1
O
Parallel MPEG data (bit 1)
33
D0
O
Parallel MPEG data (bit 0)
44
CLK_OUT
O
MPEG byte or bit clock
46
STR_OUT
O
MPEG first byte sync
47
D/NOT_P
O
MPEG data valid/parity
48
ERROR
O
MPEG packet error
Front end controls
18
AGC_RF
I/O
RF AGC control 
 (5 V tolerant)
17
AGC_IF
I/O
IF AGC control 
 (5 V tolerant)
64
TEST
I/O
Reserved test mode, must be grounded.
27
GPIO0
I/O
General-purpose input/output port 0. Reserved test mode, must be grounded.
49
GPIO1
I/O
General-purpose input/output port 1
60
GPIO2
I/O
General-purpose input/output port 2 or lock indicator
59
GPIO3
I/O
General-purpose input/output port 3 or lock indicator
58
GPIO4
I/O
General-purpose input/output port 4
57
GPIO5
I/O
General-purpose input/output port 5
54
GPIO6
I/O
General-purpose input/output port 6
53
GPIO7
I/O
General-purpose input/output port 7
52
GPIO8
I/O
General-purpose input/output port 8. Reserved test mode, must be grounded.
61
GPIO9
I/O
General-purpose input/output port 9
23
AUX_CLK
I/O
Auxiliary clock
25
CS0
I
Chip select LSB
26
CS1
I
Chip select MSB
Power supply
19, 24, 31, 38, 
45, 51, 55, 62
VDD_1V0
Digital core supply (1.0 V)
22, 28, 34, 41, 
50, 56, 63
VDD_3V3
Digital I/O supply (3.3 V)
Page of 21
Display

Download Sharp LC-42AD5E (serv.man5) Service Manual (Repair Manual)

Here you can read online and download Sharp LC-42AD5E (serv.man5) Service Manual in PDF. LC-42AD5E (serv.man5) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp LC-42AD5E (serv.man5) LCD. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.