LC-40LU700E (serv.man9). Troubleshooting Table - Sharp TV Service Manual (repair manual). Page 4

Read Sharp LC-40LU700E (serv.man9) Service Manual online

LC-32/40/46LE700E/RU/S,LU700E/S,LX700E/RU,LC-52LE700E/RU/S
6 – 4
<Backlight BLOCK: LC-40/46/52 inch models>
The backlight does not light
                                            
Does a part of the LED lamp shine?
YES
Check each LED lamp, and replace if defective.
RUNTKA595WJ01/02, RUNTKA596WJ01/02, 
RUNTKA598WJ01/02
NO
Is 3.3V supplied to pins(1) of CN7603 when the power switch is 
turned off? 
NO
Check if the peripheral circuits are short-circuited or parts are 
faulty.(IC7506, etc 
⋅ ⋅ ⋅)
YES
YES
Refer to "No power supply (Front LED does not light up)" and 
"No power-up even if turned on (Front LED light up)" 
Is UR13V supplied from pins(1) of connector CN7604 when the 
power switch is turned on? 
NO
Check if the peripheral circuits are short-circuited or parts are 
faulty.
 (T7102, D7507, C7514,7515,7516, PC7105, PC7106, 
IC7505etc 
⋅ ⋅ ⋅) 
YES
YES
Refer to "No power supply (Front LED does not light up)" and 
"No power-up even if turned on (Front LED light up)" 
Is the STB_ON/OFF signal supplied from pin(8) of CN7605? 
NO
Check the STB signal line on the MAIN_UNIT side (P9602, 
pin(49) of IC2002,IC2007,AH3 of IC3302, etc 
⋅ ⋅ ⋅)
and the peripheral circuits.
YES
Is each control signal of CN7605 normally function?
Pin(7) OFL (PWM light control signal input)
Pin(6) ERR (Error output) 
NO
Check each control circuit.
YES
Is [LAMP_ERROR] indicated with [5] in a process mode? 
NO
[LAMP_ERROR] is returned to the default value in a process 
mode.
YES
Is BL_ON supplied from pins(2) of CN7603 when the power 
switch is turned on? 
NO
Check the peripheral circuits (IC7054, etc 
⋅ ⋅ ⋅)
YES
<40 inch models>
Is VLED supplied to pins(1-5) of CN7606 and pins(1-5) of 
CN7607 when the power switch is turned on? 
NO
<40 inch models>
Check if the peripheral circuits are short-circuited or parts are 
faulty.
T7102, D7516, D7517, C7528, L7501, D7525etc 
⋅ ⋅ ⋅ 
<46/52 inch models>
Is VLED supplied to pins(1-5) of CN7606, pins(1-5) of 
CN7607,pins(1-3) of CN7608 when the power switch is turned 
on? 
NO
<46/52 inch models>
Check if the peripheral circuits are short-circuited or parts are 
faulty.
T7102, D7516, D7517, D7518, C7528, C7538, L7501, D7518, 
C7525, C7526 etc 
⋅ ⋅ ⋅   
YES
YES
Refer to "No power supply (Front LED does not light up)" and 
"No power-up even if turned on (Front LED light up)" 
Check if the peripheral circuits are short-circuited or parts are 
faulty.
IC7508, IC7601-7607, Q7601-7613, etc 
⋅ ⋅ ⋅ 
Page of 21
Display

Click on the first or last page to see other LC-40LU700E (serv.man9) service manuals if exist.