Read Sharp LC-40LE821E (serv.man15) User Guide / Operation Manual online
35
Time shift
This function enables you to pause the digital TV
programme you are watching and start watching it again
from the paused scene. This function is available only for
the 821 model series.
programme you are watching and start watching it again
from the paused scene. This function is available only for
the 821 model series.
Press READY.
The TV starts temporary recording of the real time
broadcast in the background.
Time shift recordable time is approximately 150
minutes for SD or 60 minutes for HD (depending on
the programmes).
broadcast in the background.
Time shift recordable time is approximately 150
minutes for SD or 60 minutes for HD (depending on
the programmes).
Press I.
The TV shows the programme from the scene that the
TV started recording and the recording carries on.
When the TV again playbacks after once pressing H to
stop the programme, the TV shows the programme from
the stopped scene.
TV started recording and the recording carries on.
When the TV again playbacks after once pressing H to
stop the programme, the TV shows the programme from
the stopped scene.
Buttons for time shift operation
Buttons
Description
READY
Start recording the programme you are watching.
You cannot playback the recorded
programme until approximately three
seconds after pressing READY to start
recording.
programme until approximately three
seconds after pressing READY to start
recording.
•
I
Playback the recorded programme.
H
Stop the programme in playback (time shift
recording continues) and go back to the
real time broadcast (live).
recording continues) and go back to the
real time broadcast (live).
F
Pause the programme in playback (time
shift recording continues).
shift recording continues).
This function is released in 15 minutes.
•
S
Reverse (each time you press this button,
the reverse speed changes in three levels).
the reverse speed changes in three levels).
J
Fast forward (each time you press this
button, the fast forward speed changes in
three levels).
button, the fast forward speed changes in
three levels).
a
Playback after jumping backwards by 10
seconds.
seconds.
b
Playback after jumping forward by 30
seconds.
seconds.
NOTE
Instead of pressing buttons on the remote control unit, the
operations above are also available on the screen with the
operation panel. You can call up this operation panel by
pressing CONTROL on the remote control unit or select
“Control (Time shift)” from “Option” > “Option for view”.
The operation panel for time shift displays only during time shift
operation.
The “Audio description setting” menu does not work during
time shift playback.
When the amount of memory used for time shift reaches “Full”
and the blue point is around the left edge of the bar (see
operations above are also available on the screen with the
operation panel. You can call up this operation panel by
pressing CONTROL on the remote control unit or select
“Control (Time shift)” from “Option” > “Option for view”.
The operation panel for time shift displays only during time shift
operation.
The “Audio description setting” menu does not work during
time shift playback.
When the amount of memory used for time shift reaches “Full”
and the blue point is around the left edge of the bar (see
and
in the “Counter” section on page 36), you cannot operate
some functions (F (Pause), S (Reverse), a (Jumping
backwards by 10 seconds)).
some functions (F (Pause), S (Reverse), a (Jumping
backwards by 10 seconds)).
1
•
•
2
•
•
•
•
•
•
Time shift does not work for ATV, external inputs, data
broadcasts and radio broadcasts.
To release time shift, press READY, change the DTV channel,
change “INPUT” or turn off the power of the TV.
Time shift will be released if no operations are performed for
three hours.
Some functions do not work during time shift.
Time shift is not actually a recording function, so the recorded
data is reset when you exit time shift.
Time shift does not work automatically, it starts only when you
press READY.
The PIN is required when you use the buttons such as S,
J, a, b if you set the PIN and the items for “Parental
rating” except “None” are selected.
Recording automatically stops when no signal is received
(recorded data will be lost).
Time shift does not work for any copy protected programmes.
broadcasts and radio broadcasts.
To release time shift, press READY, change the DTV channel,
change “INPUT” or turn off the power of the TV.
Time shift will be released if no operations are performed for
three hours.
Some functions do not work during time shift.
Time shift is not actually a recording function, so the recorded
data is reset when you exit time shift.
Time shift does not work automatically, it starts only when you
press READY.
The PIN is required when you use the buttons such as S,
J, a, b if you set the PIN and the items for “Parental
rating” except “None” are selected.
Recording automatically stops when no signal is received
(recorded data will be lost).
Time shift does not work for any copy protected programmes.
Examples of time shift usage
When you move away from the TV for a while
(press READY when you move away from the
TV)
(press READY when you move away from the
TV)
Without time shift
Away
You miss the scene while you are away.
With time shift
Away
You can watch the missed scene when you come back.
When you want to watch the same scene
again (you must press READY in advance for
time shift to function)
again (you must press READY in advance for
time shift to function)
Without time shift
You cannot watch the same scene again.
With time shift
You can watch the same scene again.
•
•
•
•
•
•
•
•
•
•
Useful viewing functions
Click on the first or last page to see other LC-40LE821E (serv.man15) service manuals if exist.