LC-40LE700E (serv.man14) - Sharp TV User Guide / Operation Manual. Page 11

When the TV is powered on for the first time after 
purchase, the initial auto installation wizard appears. 
Follow the menus and make the necessary settings one 
after another.

Is the antenna cable connected?
Is the AC cord plugged in?
Is the MAIN POWER switch turned on (;)?

E
E
E

Press a on the TV.

The initial auto installation wizard appears.

Setting the OSD language.

Press 

a/b/c/d to select the desired language, 

and then press 

;.

Selecting the location of the TV.

HOME

STORE

Press 

c/d to select where you will use this TV, 

and then press 

;.

HOME: “STANDARD” will be the default value for the “AV 
MODE” setting.
STORE: “DYNAMIC (Fixed)” will be the default value for 
the “AV MODE” setting. If the “AV MODE” is changed, 
the TV will automatically switch back to “DYNAMIC 
(Fixed)” when there is no signal input from the TV or 
remote control unit for 30 minutes.
A demonstration image will be displayed after initial auto 
installation is completed. If you have chosen “STORE” by 
mistake, go to “Setup” > “Reset” > select “HOME” again.

Setting the country.

Austria

Finland

Greece

Press 

a/b/c/d to select your country or area, 

and then press 

;.

This setting screen only appears during the first 
installation.

•

•

•

•

•

If you set “Sweden” in the country setting, you can select 
the cable provider “ComHem”. Refer to the 

H mark 

in the following steps or instructions about the settings for 
“ComHem”.

Starting channel search.

Digital search

Analogue search

Press 

c/d to select “Digital search” or “Analogue 

search”, and then press 

;.

To watch both analogue broadcasts and digital 
broadcasts, you should perform the channel search 
setting for each format.
If you want to search for more broadcasts, execute 
“Additional search” from the “Programme setup” menu 
(Pages 27_29).

If you turn off the power on the TV while performing a channel 
search, the initial auto installation wizard will not appear. The 
auto installation function allows you to execute the installation 
again from the “Setup” menu (Page 27).
The initial auto installation wizard will abort if you leave the TV 
unattended for 30 minutes before searching for channels.
After initial auto installation is completed, the default PIN is 
automatically set to “1234”. To change the PIN setting, refer to 
Password/Parental lock settings

 (Page 30). To clear the PIN 

setting (PIN input will no longer be needed), refer to CLEARING 
THE PIN

 (Page 46).

When “Italy” is selected in the country setting, the default age 
restriction value is set to 18.

Press 

c/d to select “Terrestrial” or “Cable”, 

and then press 

;.

Terrestrial

Cable

H

When you set “Sweden” in the country setting and select 
“Cable” for the searching format, you can select the 
cable provider “ComHem”.

The TV searches for, sorts and stores all the 
receivable TV stations according to their 
settings and the connected antenna.

To abort the initial auto installation in progress, press 6.

•

•

•

•

•

•

•

•

E

•

LC-LE700E_GB.indd   9

LC-LE700E_GB.indd   9

2009/07/13   14:51:25

2009/07/13   14:51:25