LC-40LE600E (serv.man8). Major IC Informations - Sharp TV Service Manual (repair manual). Page 13

LC-32/40/46LE600E/RU/S

6 – 13

J8, K8

CK, CK#

I

Clock:
CK and CK# are differential clock inputs. All address and control input signals are sampled on the 
crossing of the positive edge of CK and negative edge of CK#.
Output (read) data is referenced to the crossings of CK and CK# (both directions of crossing).

K2

CKE

I

Clock Enable: 
CKE HIGH activates, and CKE Low deactivates, internal clock signals and device input buffers and 
output drivers.
Taking CKE Low provides Pre charge Power-Down and Self Refresh operation (all bank idle), or 
Active Power-Down (row Active in any bank).
CKE is synchronous for power down entry and exit, and for self refresh entry. CKE is asynchro-
nous for self refresh exit.
After VREF has become stable during the power on and initialization sequence, it must be main-
tained for proper operation of the CKE receiver. For proper self-refresh entry and exit, VREF must 
be maintained to this input. 
CKE must be maintained high throughout read and write accesses. Input buffers, excluding CK, 
CK#, ODT and CKE are disabled during power-down. Input buffers, excluding CKE are disabled 
during self refresh. 

L8

CS#

I

Chip Select:
All commands are masked when CS# is registered HIGH.
CS# provides for external bank selection on systems with multiple banks.
CS# is considered part of the command code.