LC-40LE531E (serv.man2) - Sharp TV Service Manual (repair manual). Page 14

Read Sharp LC-40LE531E (serv.man2) Service Manual online

14
LC-32LE511
LC-40LE511
LC-40LE531
 Operation Manual (Continued)
English   - 14 -
Side HDMI Connection (HDMI 4)
The side HDMI is convenient connection for external 
HDMI devices, use an appropriate HDMI cable and 
ensure both the TV and external device are switched 
off before making the connection. Select HDMI 4 from 
the Source list to access this input.
HDMI DEVICE         SIDE VIEW
Connecting the LCD TV to a PC
For displaying your computer’s screen image on your 
LCD TV, you can connect your computer to the TV set. 
Power off both computer and display before making 
any connections. Use 15-pin D-sub display cable to 
connect a PC to the LCD TV. When the connection 
is made, switch to PC source. See “Input selection” 
section. Set the resolution that suits your viewing 
requirements. Resolution information can be found 
in the appendix parts.
  
For more information on recording programmes, 
• 
see sections “Instant Recording”, “Timeshifting”, 
“Electronic Programme Guide”, “Recordings Library” 
or “Recording Timers” in the following parts.
Recorded programmes are stored in the following 
• 
directory of the connected USB disk: \DVR\RECS. 
All recordings are indicated with a number (such 
as 4801-000.ts). A text (txt)  le is created for each 
recording. This text  le includes information such as 
broadcaster, programme, and recording time.
If the writing speed of the connected USB disk is not 
• 
suf cient, recording may fail and timeshifting feaute 
may not be available.
Recordings of HD programmes can occupy bigger 
• 
size on the USB disk depending on the broadcast’s 
resolution. For this reason it is recommended 
to use USB hard disk drives for recording HD 
programmes.
Do not plug out the USB/HDD during the recording. 
• 
This may harm the connected USB/HDD.
Only two partitions on a HDD unit can be 
• 
supported.
Some stream packets may not be recorded  because 
• 
of signal problems, so sometimes video may freezes 
during playback. 
Record, Play, Pause, Display (for PlayListDialog) 
• 
keys could not be used when teletext is ON. If a 
recording starts from timer when teletext is ON, 
teletext is automatically turned off. Also teletext 
usage is disabled when there is ongoing recording 
or playback.
Note: If the recording time of an event is longer than 
the memory capacity, the following message will 
appear on the screen: “There is not enough space for 
‘event’ but it will be recorded until the drive is full”.
[GB]_MB70_1910UK_IDTV_T2_32942LED_STORE_MODE_GOLD11_10072643_50186875.indd   14
06.07.2011   15:28:50
Page of 127
Display

Click on the first or last page to see other LC-40LE531E (serv.man2) service manuals if exist.