Read Sharp LC-40F22EA (serv.man3) User Guide / Operation Manual online
English - 10 -
Viewing the Connections - Side Connectors
CI Slot
1.
is used for inserting a CI card. A CI card allows you to view all the channels
that you subscribe to. For more information, see “Conditional Access” section.
USB Inputs
USB Inputs
2.
.
Note that programme recording feature is available via these USB inputs. You can
connect external hard disk drives to this input.
Video Input
connect external hard disk drives to this input.
Video Input
3.
is used for connecting video signals of external devices.Connect the video
cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on your device.
Audio Inputs
Audio Inputs
4.
are used for connecting audio signals of external devices. Connect the audio
cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT jacks on your device.
Note: If you connect a device to the TV via the VIDEO INPUT, you should also connect
your device with an audio cable to the AUDIO INPUTS of the TV to enable audio.
Component Video Input (YPbPr)
Note: If you connect a device to the TV via the VIDEO INPUT, you should also connect
your device with an audio cable to the AUDIO INPUTS of the TV to enable audio.
Component Video Input (YPbPr)
5.
is used for connecting component video.
You can connect the component video and audio sockets with a device that has
component output. To do this, you must use the supplied component video connection
cable for enabling connection. First, plug single jack of the cable to the TV’s YPbPr
socket (side). Afterwards, insert your component cable’s (not supplied) connectors
into the plural part of the Component video connection cable. Colours of the
connected jacks should match.
Headphone
component output. To do this, you must use the supplied component video connection
cable for enabling connection. First, plug single jack of the cable to the TV’s YPbPr
socket (side). Afterwards, insert your component cable’s (not supplied) connectors
into the plural part of the Component video connection cable. Colours of the
connected jacks should match.
Headphone
6.
jack is used for connecting an external headphone to the system.
Connect to the HEADPHONE jack to listen to the TV from headphones (optional).
7.
, switch is used for turning the TV on or off.
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50Hz.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
•
mains. Plug the power cable to the mains socket outlet.
Aerial Connection
Connect the aerial ,cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
•
SPDIF
SCART
VGA
Coax.OUT
1
2
YPbPr
00_MB60_[GB]_1910UK_IDTV_PVR_NICKEL16_40883W_YPBPR_ROCKER_10075802_50201048.indd 10
00_MB60_[GB]_1910UK_IDTV_PVR_NICKEL16_40883W_YPBPR_ROCKER_10075802_50201048.indd 10
19.10.2011 09:29:07
19.10.2011 09:29:07
Click on the first or last page to see other LC-40F22EA (serv.man3) service manuals if exist.