Read Sharp LC-40F22E (serv.man3) User Guide / Operation Manual online
English - 13 -
Switching On/Off
To Switch the TV On
Connect the power cord to the 220-240V AC 50 Hz.
Switch the “
•
” button on the rear left hand side
to position “|” so the TV will switch to standby mode.
Then the standby LED lights up.
To switch on the TV from standby mode either:
Then the standby LED lights up.
To switch on the TV from standby mode either:
•
Press the “
•
” button, P+ / P- or a numeric button
on the remote control.
Press the “
•
” or +/- button on the TV.
The TV will then switch on.
•
Note : If you switch on your TV via PROGRAMME
UP/DOWN buttons on the remote control or on the
TV set, the programme that you were watching last
will be reselected.
By either method the TV will switch on.
Note : If you switch on your TV via PROGRAMME
UP/DOWN buttons on the remote control or on the
TV set, the programme that you were watching last
will be reselected.
By either method the TV will switch on.
To Switch the TV to Standby
To switch the TV to low power standby press the
“
“
” button on the remote control or right hand side
of the TV.
Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such
as Standby Search, Over Air Download or Timer is
active.
Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such
as Standby Search, Over Air Download or Timer is
active.
To Switch the TV Off
Switch the “
•
” button on the rear left to position
2 as illustrated,
to isolate the TV from the mains,
the LED will go out.
If the TV will not be used for a long period i.e.
If the TV will not be used for a long period i.e.
•
holidays, then unplug the power cord from the
mains socket.
mains socket.
Digital Teletext (** for UK only)
• Press the “
” button.
• The digital teletext information appears.
•
• Operate it with the coloured buttons, cursor buttons
•
and OK button.
The operation method may differ depending on the
contents of the digital teletext.
Follow the instructions displayed on digital teletext
screen.
contents of the digital teletext.
Follow the instructions displayed on digital teletext
screen.
• When Press “
•
SELECT” button or similar message
appears on the screen, press the OK button.
• When the “
• When the “
•
” button is pressed, the TV returns to
television broadcasting.
• With digital terrestrial broadcasting (DVB-T), in
• With digital terrestrial broadcasting (DVB-T), in
•
addition to digital teletext broadcasting together with
the normal broadcasting, there are also channels with
just digital teletext broadcasting.
the normal broadcasting, there are also channels with
just digital teletext broadcasting.
• The aspect ratio (picture shape) when watching
•
a channel with just digital teletext broadcasting is
the same as the aspect ratio of the picture viewed
previously.
• When you press the “
the same as the aspect ratio of the picture viewed
previously.
• When you press the “
•
” button again, the digital
teletext screen will be displayed.
Analogue Teletext
Use of teletext and its functions are identical to the
analogue text system. Please do refer to the “TELETEXT”
explanations.
analogue text system. Please do refer to the “TELETEXT”
explanations.
Input Selection
Once you have connected external systems to your
TV, you can switch to different input sources. Press
“SOURCE” button on your remote control consecutively
for directly changing sources.
TV, you can switch to different input sources. Press
“SOURCE” button on your remote control consecutively
for directly changing sources.
You can operate your TV using both the remote control
and onset buttons.
and onset buttons.
Operation with the Buttons on the TV
Volume Setting
Volume Setting
Press “
•
” button to decrease volume or
button to increase volume, so a volume level scale
(slider) will be displayed on the screen.
(slider) will be displayed on the screen.
Programme Selection
Press “
•
P/CH +” button to select the next programme or
“P/CH -” button to select the previous programme.
Viewing Main Menu
Press the “
•
V+”/”V-” button at the same time to view
main menu. In the Main menu select sub-menu using
“AV” button and set the sub-menu using “
“AV” button and set the sub-menu using “
” or
“
” buttons. To learn the usage of the menus,
refer to the menu system sections.
AV Mode
Press the “
•
AV” button in the control panel on the TV
to switch between AV modes.
Operation with the Remote Control
The remote control of your TV is designed to control all
•
the functions of the model you selected. The functions
00_MB61_[GB]_3902UK_IDTV_SILVER11_40883W_(power save mode)_10070342_50177278.indd 13
00_MB61_[GB]_3902UK_IDTV_SILVER11_40883W_(power save mode)_10070342_50177278.indd 13
04.10.2010 13:42:44
04.10.2010 13:42:44
Click on the first or last page to see other LC-40F22E (serv.man3) service manuals if exist.