LC-40CT2E (serv.man3) - Sharp TV User Guide / Operation Manual. Page 17

English   - 17 -

the main menu and use  or  buttons to highlight “TV 
Setup”. Press OK button to display TV Setup menu 
screen. 
You can fi nd detailed information for all menu items 
in “Analogue TV Menu System” section.

The adjustments in this menu are given as the 
following:

You can confi gure the settings of your TV. Select 
Confi guration from Setup menu and press OK to 
view this menu. Press the RETURN button on the 
remote control to exit.

You can select broadcasts to be listed in the channel 
list. To display specific types of broadcast, you should 
use active channel list setting. Select Active channel 
list by using “ ” or “ ” button. Press OK button to 
continue.

Scan Encrypted Channel feature will always be YES 
after performing first time installation. When this 
setting is on, search process will locate the encrypted 
channels as well. If it is set as NO manually, encrypted 
channels will not be located while in automatic search 
or manual search. Use “ ” or “ ” button to select 
Scan Encrypted and then press “ ” or “ ” button to 
set this setting as Yes or No.

You can use this option to confi gure output settings.

AC3 Audio
Highlight the AC3 Audio item by pressing “ ” or 
“ ” buttons. Use the “ ” or “ ” buttons to set the 
AC3 Audio as On or Off.
If the channel that you are watching supports AC3 
Audio, turn this setting on.
SPDIF Delay
You can use this setting when there is an 
synchronization problem in the received broadcast. 
Press “ ” or “ ” button to change the delay or use 
numeric buttons to enter SPDIF Audio delay manually. 
When fi nished, press GREEN button to apply.
SPDIF Audio
Use this setting to define digital audio out signal 
type. Use “ ” or “ ” buttons to set SPDIF Audio 
as  Compressed or PCM. If your selected channel 
includes  Compressed sound stream, you should 
connect your TV to external equipment by using 
spdif out of your TV for enabling the sound output. 
If you have no external sound equipment, please 
select Digital Audio Out as “PCM” by using “ ” or “

” button.

To ensure that your TV always has the most up to date 
information, use this setting. Please ensure that the TV 
is set to    standby mode. The  TV automatically 
powers up at 3.00 A.M. each day and searches for 
any new information which may be broadcast and 
will download this to your receiver automatically. This 
operation will normally take approximately 30 minutes. 
If you have an important recording to be carried out at 
3.00 A.M. and you do not want to interrupt it, disable 
auto OAD search by performing the following:
• Press MENU button and using the “ ” or “ ” buttons 

to choose Setup and press OK button.

• Highlight Confi guration menu with “ ” or “ ” keys 

and press OK.

• Using the “ ” or “ ” button change “Automatic 

scanning” from Enabled to Disabled.

A01_MB38_[GB]_3920UK_IDTV-T2_GOLD7_40883W_10067520_50164264.indd   17

A01_MB38_[GB]_3920UK_IDTV-T2_GOLD7_40883W_10067520_50164264.indd   17

25.03.2010   10:37:50

25.03.2010   10:37:50