Read Sharp LC-39LE651K (serv.man10) Technical Bulletin online
LCD 2013 06 06
Date of Issue:
25
th
June 2013
Classification:
White
LCD TELEVISION TECHNICAL BULLETIN
Page 14 of 17
Sharp Electronics (UK) Limited
Reference
– RG25062013-2
Revision - 6
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
Name: TEXT
Params: YES
R/W: R/W
K-Mode: NO
Description:
Set TV teletext mode.
Params:
0: Toggle different teletext modes in sequence:
TTX OFF TTX ON TTX OFF
1: Teletext ON.
2: Teletext OFF.
?: Read teletext mode.
2: Teletext OFF.
?: Read teletext mode.
Return:
0: Teletext OFF.
1: Teletext ON.
1: Teletext ON.
OSD:
Same OSD information that it is used in USER mode.
Name: SBSL
Params: YES
R/W: WO
K-Mode: NO
Description:
Set backlight value. Same adjustment that it is in the main menu.
Params:
xxxx: Backlight value, from 0 to 100, same value range that in the menu.
Name: CUSB
Params: NO
R/W: WO
K-Mode: YES
Description:
Check all TV USB connectors. This checking is done by reading a different file from a USB memory
in each connector. If a file cannot be read, then the command returns the wrong files in hex
format, each bit correspond to one file.
Only available when K-Mode is ON.
in each connector. If a file cannot be read, then the command returns the wrong files in hex
format, each bit correspond to one file.
Only available when K-Mode is ON.
Return:
“OK” if all files can be read.
Hex number indicating which files couldn’t be read.
Ex: 0x06 (0000 0110 ) means file 2 and 3 couldn’t be read.
Hex number indicating which files couldn’t be read.
Ex: 0x06 (0000 0110 ) means file 2 and 3 couldn’t be read.
Name: MACR
Params: YES
R/W: RO
K-Mode: NO
Description:
This command returns the MAC address stored on “hwid.bin” file. If MAC address stored in
“hwid,bin” file is changed using “MACF” command to download a new MAC file, TV will not used
new MAC address until TV is rebooted. During this time, “MACR” command and “NTKY”
command will return different MAC address.
“hwid,bin” file is changed using “MACF” command to download a new MAC file, TV will not used
new MAC address until TV is rebooted. During this time, “MACR” command and “NTKY”
command will return different MAC address.
Params:
?: Read MAC address.
Return:
xx:xx:xx:xx:xx:xx: MAC address.
Click on the first or last page to see other LC-39LE651K (serv.man10) service manuals if exist.