Read Sharp LC-37XL8E (serv.man9) User Guide / Operation Manual online
Quick guide
Supplying power to the antenna
You must supply power to the antenna in order
to receive digitally/terrestrially broadcast stations
after connecting the antenna cable to the antenna
terminal on the rear of the TV.
to receive digitally/terrestrially broadcast stations
after connecting the antenna cable to the antenna
terminal on the rear of the TV.
Press MENU and the “MENU” screen displays.
Press
Press
c/d to select “Setup”.
Press
a/b to select “Antenna Setup-DIGITAL”, and
then press OK.
Press
Press
a/b to select “Supply Voltage”, and then press
OK
.
Press
c/d to select “On”, and then press OK.
1
2
3
2
3
4
5
Mounting the TV on a wall
This TV should be mounted on the wall only with the wall mount bracket and attachment available
from SHARP (Page 39). The use of other wall mount brackets may result in an unstable installation
and may cause serious injuries.
Mounting the LCD colour TV requires special skills and should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility
for improper mounting or mounting that results in accident or injury.
You can ask a qualified service personnel about using an optional bracket and attachment to mount the TV to the wall.
To use this TV mounted on a wall, first remove the adhesive tape at the two locations on the rear of the TV, and
then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.
When you mount the TV on a wall, you should attach the supporting post.
When mounting the TV on a wall, the centre of the TV screen is 17.3 mm below the mark “A” engraved on the
metal plate angle used for affixing to a wall (applicable model: LC-32XL8E, LC-32XL8S).
When mounting the TV on a wall, the centre of the TV screen is 44.1 mm below the mark “A” engraved on the
metal plate angle used for affixing to a wall (applicable model: LC-37XL8E, LC-37XL8S).
from SHARP (Page 39). The use of other wall mount brackets may result in an unstable installation
and may cause serious injuries.
Mounting the LCD colour TV requires special skills and should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility
for improper mounting or mounting that results in accident or injury.
You can ask a qualified service personnel about using an optional bracket and attachment to mount the TV to the wall.
To use this TV mounted on a wall, first remove the adhesive tape at the two locations on the rear of the TV, and
then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.
When you mount the TV on a wall, you should attach the supporting post.
When mounting the TV on a wall, the centre of the TV screen is 17.3 mm below the mark “A” engraved on the
metal plate angle used for affixing to a wall (applicable model: LC-32XL8E, LC-32XL8S).
When mounting the TV on a wall, the centre of the TV screen is 44.1 mm below the mark “A” engraved on the
metal plate angle used for affixing to a wall (applicable model: LC-37XL8E, LC-37XL8S).
•
•
•
•
•
•
•
•
•
Before turning on the power
Bundling the cables
Product shape varies in some countries.
8
Carefully insert the CI
Module in the CI slot
with the contact side
forward.
The logo on the CI
Module must be
facing forward from
the rear of the TV.
Module in the CI slot
with the contact side
forward.
The logo on the CI
Module must be
facing forward from
the rear of the TV.
1
2
Cable clamp
Bundle the cables with
the clamp.
AC cord
Place the TV close to the
AC outlet, and keep the
power plug within reach.
AC outlet, and keep the
power plug within reach.
Standard
DIN45325 plug
(IEC 169-2) 75
DIN45325 plug
(IEC 169-2) 75
q
coaxial cable
Click on the first or last page to see other LC-37XL8E (serv.man9) service manuals if exist.