LC-37XL8E (serv.man9) - Sharp TV User Guide / Operation Manual. Page 34

For setting the signal type of external equipment.

If no (colour) image displays, try changing to another 
signal type.
Check the operation manual of the external equipment for 
the signal type.
When the signal type is set to “Auto”, the input terminal 
where a cable is connected is automatically selected.

•

•

•

You can label each input source with a custom 
description.

Press 

b to select the desired input source.

Go to “MENU” > “Setup” > “Input Label”.

Press 

a/b/c/d to select each character of the 

new name for the input source, and then press 
OK.

A

BACK

CLEAR

END

K
U

B

L
V

C

M
W

D

DVD

N

X

E

O

Y

F

P
Z

G
Q

+

H
R

–

_

I

S

.

J
T

0

1

2

3

4

5

6

7

8

9

Repeat until the label is fully spelt out.

The label can be six characters or less.
When you want to set an input source label of less than six 
characters, select “END” to set the name.

INPUT SOURCE 

TV 

EXT1

EXT2

EXT3

DVD 

EXT5

EXT6

You cannot change labels if the input source is “TV”.

•
•

•

This setting allows you to skip the SCART, HDMI or 
RGB input on the Input Source Selection operation.

EXT1 (SCART)

EXT2 (SCART)

EXT4 (HDMI)

EXT5 (HDMI)

EXT6 (HDMI)

EXT7 (RGB)

Y es 

No 

You can change the colour system to one that is 
compatible with the image on the screen.

The factory preset value is “Auto”.
If “Auto” is selected, the colour system for each channel 
is automatically set. If an image does not display clearly, 
select another colour system (e.g. “PAL”, “SECAM”).

•
•

You can reduce the TV’s start-up time after turning on 
the power with the remote control unit.

Y/C, CVBS, RGB

Y/C, CVBS, RGB

 Auto, S-VIDEO, VIDEO

 The TV quickly starts up from standby. 30 W or 

more of power consumption is required during standby.

 Power consumption is small during standby.