Read Sharp LC-37XL8E (serv.man9) User Guide / Operation Manual online
The TV will automatically enter standby mode if no
operations are performed during the time span you set
(“30min.” or “3hr.”).
operations are performed during the time span you set
(“30min.” or “3hr.”).
Five minutes before the TV enters standby mode, the
remaining time displays every minute.
remaining time displays every minute.
•
When set to “Yes”, the TV activates the following
power saving mode.
power saving mode.
“OPC” set to “On” (Page 24).
“Standby Mode” set to “Mode2” (Page 32).
“No Signal Off” set to “Enable” (Page 25).
“No Operation Off” set to “3hr.” (Page 26).
“Standby Mode” set to “Mode2” (Page 32).
“No Signal Off” set to “Enable” (Page 25).
“No Operation Off” set to “3hr.” (Page 26).
•
•
•
•
•
•
•
Allows you to set a time when the TV automatically
enters standby mode.
enters standby mode.
NOTE
Select “Off” to cancel the sleep timer.
When the time has been set, countdown automatically
starts.
Five minutes before the preset of time expires, the
remaining time displays each minute.
When the time has been set, countdown automatically
starts.
Five minutes before the preset of time expires, the
remaining time displays each minute.
Channel Settings
Auto Installation
•
•
•
•
No Operation Off
Power Control
Ecology
Power Control
Sleep Timer
Power Control
Basic adjustment
Auto Installation
Setup
The TV automatically detects and stores all available
services in your area. This function also allows you to
perform the channel setting for digital and analogue
individually and reconfigure the settings after the initial
auto installation has been completed.
services in your area. This function also allows you to
perform the channel setting for digital and analogue
individually and reconfigure the settings after the initial
auto installation has been completed.
After selecting “Yes” on the screen, you can set
language and channel search the same as in the
initial auto installation. Follow steps 2, 4 and 5
on page 9.
language and channel search the same as in the
initial auto installation. Follow steps 2, 4 and 5
on page 9.
NOTE
You cannot set the country setting in “Auto Installation” in
the “Setup” menu. If you want to reconfigure the country
setting, automatically execute initial auto installation after
executing “Reset” from the “Setup” menu.
The current country setting is displayed on the screen.
the “Setup” menu. If you want to reconfigure the country
setting, automatically execute initial auto installation after
executing “Reset” from the “Setup” menu.
The current country setting is displayed on the screen.
•
•
Programme Setup
Setup
Digital Setting
You can reconfigure the DTV service settings
automatically or manually.
automatically or manually.
Additional Search
Use this menu to add new services automatically after
auto installation has been completed.
auto installation has been completed.
Manual Search
Add new services within a specified frequency band.
Enter the frequency using 0–9 numeric buttons.
You can perform “Manual Search” with a service number
only when the five Nordic countries have been selected in
the country setting.
You can perform “Manual Search” with a service number
only when the five Nordic countries have been selected in
the country setting.
Manual Adjust
Configure various settings for each service using the
Colour (R, G, Y, B)
Colour (R, G, Y, B)
buttons.
DTV 993
Service
No.
Old
LCN
EPG
Skip
Skip
CH
Skip
Lock
Service
Name
Name
SIT 3
DTV 994
✔ ✔
SIT 2
DTV 995
✔
SIT 1
DTV
999
HD Monosco
: Lock
R
: CH Skip
G
: EPG Skip
Y
: Sort
B
Press
a/b to select the desired service.
Press the colour button on the remote control unit
corresponding with the item you want to reconfigure.
corresponding with the item you want to reconfigure.
The
✔ mark indicates the operation is set to on. Each
time the colour button is pressed, you can switch the
corresponding operation on/off.
corresponding operation on/off.
E
E
•
•
•
E
1
2
2
•
Digital channel settings
26
Buttons for Manual Adjust operation
Lock: Press R button.
When the service is locked, you must enter your PIN
whenever you tune to the service.
whenever you tune to the service.
CH Skip: Press G button.
Services with a
✔ mark are passed over when pressing
P
r/s on the TV or remote control unit.
EPG Skip: Press Y button.
Services with a
✔ mark are passed over in the Electronic
Programme Guide (EPG).
Sort: Press B button.
The item position of services can be sorted.
Press
a/b to select the service whose item
position you want to move, and then press OK.
DTV 994
✔ ✔
SIT 2
DTV 995
✔
SIT 1
Press
a/b to move it to the desired position,
and then press OK.
DTV
994
✔
✔
SIT 1
DTV
995
✔
SIT 2
Repeat steps 1 and 2 until all desired service
items are sorted.
items are sorted.
1
2
3
Click on the first or last page to see other LC-37XL8E (serv.man9) service manuals if exist.