Read Sharp LC-37XD1EB (serv.man8) Technical Bulletin online
LCD 2009 05 01
Date of Issue: 11
th
May 2009
Classification: White
LCD TELEVISION TECHNICAL BULLETIN
Page 1 of 4
Sharp Electronics (UK) Limited
Reference – SP090500X
Revision - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
MODELS
LC37XD1E
LC37XD1EB
SYMPTOM Vibration noise from rear cabinet.
CAUSE
Plastic on plastic rubbing.
ACTION
Fit the following kit to reduce vibration within the cabinet and it’s back as shown in the
following pages.
following pages.
REF NO
DESCRIPTION
PART NUMBER
PRICE CODE
-
Vibration noise repair set
CKIT-0005WJV0
AM
FIGURE 1: Parts identification.
LCD 2009 05 01
Date of Issue: 11
th
May 2009
Classification: White
LCD TELEVISION TECHNICAL BULLETIN
Page 2 of 4
Sharp Electronics (UK) Limited
Reference – SP090500X
Revision - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
FIGURE 2: Screw location.
FIGURE 3: Screw location.
LCD 2009 05 01
Date of Issue: 11
th
May 2009
Classification: White
LCD TELEVISION TECHNICAL BULLETIN
Page 3 of 4
Sharp Electronics (UK) Limited
Reference – SP090500X
Revision - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
1.2 – Apply auto adhesive Himelon Traberon Spacer PSPAHB823WJZZ and PSPAHB824WJZZ in
the top area of the rear cabinet. See details on Figure 4.
FIGURE 4: Apply Himelon Traberon spacers to locations shown.
1.3. Apply auto adhesive Himelon Traderon spacer PSPAHA850WJZZ at bottom left and right sides
of rear cabinet. Repeat process for PSPAHB086WJZZ into the bottom areas of the rear as seen in
figure 5.
FIGURE 5: Sides and lower fixing points.
1.4. Apply auto adhesive rubber spacers PSPAGA344WJZZ x 4. See bellow.
LCD 2009 05 01
Date of Issue: 11
th
May 2009
Classification: White
LCD TELEVISION TECHNICAL BULLETIN
Page 4 of 4
Sharp Electronics (UK) Limited
Reference – SP090500X
Revision - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
Figure 6. Apply Rubber spacers.
1.5. Re-assemble cabinet and 16 screws removed earlier and add the 4 extra screws part number
LX-BZA170WJF9 as shown in figure 7.
FIGURE 7: Extra screws added.