LC-37XD1E (serv.man4). Troubleshooting Table - Sharp TV Service Manual (repair manual). Page 12

     LC-37XD1E/RU

4 – 12

<When EXT1 is used for external input>                                                                      No picture on the display (3)-1

No EXT1 -Composite output of the external input system. 

No EXT1-RGB output of the external input  system.  

Checklist:

  1)  Is "INPUT SOURCE" button

on the remote control set up correctly? ...See the operation manual and set "INPUT SOURCE" to "EXIT".

  2)  Is MENU-Picture-Backlight/Contrast/Brightness set to "MIN"? ...Set it to an appropriate level.
  3)  Check the connection to the external device ...Connect it correctly as per the operation manual for the device.

Is composite video signal 
sent to pin  (20) of 
SCART1  (J1101)?   

NO

Check external  connec-
tion, input setting, 
SCART1 and peripheral 
circuits.    

IIs RGB signal sent to 
pins (15),(11)  and (7) of 
SCART1  (J1101) ?    

NO

Check external  connec-
tion, input  setting, SCART1  
(J1101) and peripheral cir-
cuits.    

YES

YES

Is composite video signal 
(VIN1(V))  sent to input 
terminal pin (AB22)  of 
IC3002 (V-PRO.) ?   

NO

Check CONNECTOR 
(SC2702/
P1101),SCART1(J1101) 
and peripheral circuits.     

Is RGB signal  (RED1/
GREEN1/BLUE1) sent to 
input terminal pins  
(Y19)(AB19) and  (AC18) 
of IC3002 (V-PRO.) ?    

NO

Check CONNECTOR 
(SC2702/P1101),SCART1 
(J1101) and peripheral cir-
cuits.     

YES

YES

Is LVDS video signal (TA1

± - TD1±) sent to pins  (AB8)/(AC8) - (AB3)/(AC3) of IC3002 (V-PRO.), and 

is CLK signal (CK1) sent to pins (AB5)/(AC5)?
Is LVDS video signal (TA2

± - TD2±) sent to pins  (AC2)/(AC1) - (V2)/(V1) of IC3002 (V-PRO.), and is 

CLK signal (CK2

±) sent to pins (Y2)/(Y1)?  

NO

Check pins (G14)/(U10) of 
BU3.3V line of IC3002 (V-
PRO.), pins  (G10)/(N17) of 
BU2.5V line,pins  (U16)/
(G12) of BU1.8V line and 
peripheral circuits.

YES

Is LVDS video signal (TA1

± - TD1±) sent to pins (3)/(2) -(12)/(11) of CONNECTOR CN1 of LCD-

CONT-UNIT, and is CLK signal (CK1

±) sent to pins (10)/(9)?

Is LVDS video signal (TA2

± - TD2±) sent to pins (17)/(16) -(26)/(25) of CONNECTOR CN1 of LCD-

CONT-UNIT, and is CLK signal (CK2

±) sent to pins (24)/(23)?  

NO

Check CONNECTOR 
(SC2302, CN1) and HAR-
NESS WIRE (LV).

YES

 Is power (+12V) supplied to pins (1) - (5) of CONNECTOR CN2 in LCD-CONT-UNIT?  

NO

Check CONNECTOR 
(CN2,P707) and HAR-
NESS WIRE (PL).

YES

 Replace LCD-CONT-UNIT.