Read Sharp LC-37X20E (serv.man4) Service Manual online
LC-32X20E/S/RU, LC-37X20E/S/RU
3 – 13
10)Mode Fixed [INPUT MODE FIXED]
9. Video signal adjustment procedure
* The adjustment process mode menu is listed in Section 4.
Signal generator level adjustment check (Adjustment to the specified level)
1. Entering the adjustment process mode
Enter the adjustment process mode according to Section 3.
2. RF AGC adjustment
3. PAL signal & tuner adjustment
Selection
“VARIABLE” or “FIXED” is selectable. (Loop is provided.)
Default
VARIABLE
Function
When set to “FIXED”, it is disable to switch to other channel or input after start in the set value of “Start Mode (INPUT
MODE START)”.
MODE START)”.
Keys disabled when not
set to Default (Example)
set to Default (Example)
Channel UP/Down, Direct, Channel Button, FLASHBACK, INPUT, STILL, Digit Select and Direct input switching
Remarks
• When “START MODE” is set to “NORMAL”, this item is disable to set. (Automatically set to “VARIABLE”.)
• When set to “FIXED”,
• When set to “FIXED”,
The Channel setting MENU (Menu-setup-Auto Installation, Programme setup and Child Lock item hatching) and
Input Selection MENU in MENU are not displayed.
Input Selection MENU in MENU are not displayed.
• Composite signal PAL
: 0.7Vp-p
± 0.02Vp-p (Pedestal to white level)
• RGB signal
: 0.7Vp-p
± 0.02Vp-p
• 15K component signal (50 Hz) : Y level
: 0.7Vp-p
± 0.02Vp-p (Pedestal to white level)
: PB, PR level
: 0.7Vp-p
± 0.02Vp-p
Adjustment point
Adjustment Conditions
Adjustment procedure
1
Setting
[Signal]
PAL
Split Field Colour Bar RF signal
U/V
PAL
Split Field Colour Bar RF signal
U/V
[Terminal]
TUNER
TUNER
• Feed the PAL Split Field colour bar signal (E-12ch) to TUNER.
Signal level: 55 dB
µV ± 1dB (75Ω LOAD)
2
Auto adjustment
performance
performance
Page 3/33
Bring the cursor on [RF AGC ADJ] and press [OK] [RF AGC ADJ OK] appears
when finished.
when finished.
Adjustment point
Adjustment Conditions
Adjustment procedure
1
Setting
[Signal]
PAL
Full Field Color Bar Composite
or RF signal
PAL
Full Field Color Bar Composite
or RF signal
[Terminal]
EXT1 SCART IN TUNER
EXT1 SCART IN TUNER
• Feed the PAL full field colour bar signal (75% colour saturation) to EXT1
SCART IN.
• Feed the RF signal (PAL colour bar) to TUNER.
• Make sure the PAL colour bar pattern has the sync level of 7:3 with the pic-
• Make sure the PAL colour bar pattern has the sync level of 7:3 with the pic-
ture level.
2
Auto adjustment
performance
performance
Page 3/33
Bring the cursor on [PAL+TUNER ADJ] and press [OK] [PAL+TUNER ADJ OK]
appears when finished.
appears when finished.
[E-12CH]
㸡100% white
㸡100% white
㪲VIDEO IN SIGNAL]
㸡100% white
[RF Signal]
Click on the first or last page to see other LC-37X20E (serv.man4) service manuals if exist.