Read Sharp LC-37P70E (serv.man7) Service Manual online
28
LC-26GA5E
LC-32GA5E
LC-26P70E
LC-32P70E
LC-37P70E
27
LC-26GA5E
LC-32GA5E
LC-26P55E
LC-32P55E
LC-37P55E
2. Send the command “DWMD” to enter TV set in Download Mode. The TV set answer sending same symbol con-
tinuosly. If this symbol character doesn’t appear, please don’t worry and pass to next step.
3. Close this connection and open “P55_115200bps”
connection clicking over the “P55_115200bps”
that
you can find
in “START\All programs\Accessories\ Communications\HyperTerminal\HyperTerminal” folder.
4. Using “Transfer\Send fi le…” menu, select desired fi le (.bin format) and the transmission protocol (Xmodem) as
show below.
5. After press “Send” button the updating process starts as follows:
6. When fl ash update process fi nishes, the “Flash Programming Complete” label appears in the screen.
VERY IMPORTANT NOTE:
During the updating time, please don’t use the PC for other purpouses, in order to abolish communication
problems between TV set and PC. If TV set was not updated properly, the TV won’t have the software to startup
again, and you must follow the “I2C method” to update another time the TV set.
VCTp Software Updating, HyperTerminal (continued)
(*)
(*)
(*)
If it has been created this file for P55E Series, it may be used for P70E. If not it may be created a “P70_9600bps.”
Click on the first or last page to see other LC-37P70E (serv.man7) service manuals if exist.