LC-37P50E. Version 1.1 - Sharp TV Handy Guide. Page 16

Read Sharp LC-37P50E Handy Guide online

Unit Reset Procedures
Version 1.1
Issue 06/2006
16
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Initialising Factory Defaults
PLEASE REFER TO PAGE 31 ON HOW TO ENTER THE DISPLAY PROCESS MODE
Caution:
 When the factory settings have been made, all user setting data, including the
channel settings, are initialised. (The adjustments done in the adjustment process mode are
not initialised.) Keep this in mind when initialising these settings.
Adjustment item
Adjustment conditions
Adjustment procedure
• 
Enter the adjustment process mode.
• 
Bring the cursor on to [INDUSTRY INIT] on page
2/12.
• 
Use the [Volume +-] key to select a region from
[AUTO/EURO/UK/ITALY/ FRANCE/RUSSIA] and
press [ENTER]. “////////” appears and initialization
starts.After a while, “SUCCESS—[regional code]”
appears and the setting is complete.
Note: Never turn the power off during
initialisation.
The background appears green when succeeded,
and red when failed.
*Never turn off the power during the initialisation
process.
Factory settings
See to below caution
The following settings will be back to their factory
defaults.
1. User settings
2. Channel data (e.g. broadcast frequencies)
3. Password data
After adjustments, exit the adjustment process mode.
To exit the adjustment process mode, unplug the AC power cord from the outlet to forcibly
turn off the power.
When the power is turned off with the remote control, unplug the AC power cord and plug it
back in (wait approximately 10 seconds before plugging in the AC power cord).
Page of 47
Display

Click on the first or last page to see other LC-37P50E service manuals if exist.