Read Sharp LC-37LE320E (serv.man2) User Guide / Operation Manual online
37”
32”
42”
19” 22” 26”
( 246.0) / ( (246.0) )/ [ 389.97 ] / [[ 418.0]] / {460.0} / {{500.0}}
( 38.6) / ( (38.6) )/ [ 39.6] /
[[ 44.9]] / {44.9} / {{44.9}}
( 170.0) / ( (170.0) )/ [ 215.98] /
[[ 238.0]] / {250.0} / {{260.0}}
( 411.205) / ( (477.64) )/ [ 577.25] /
[[ 700.67]] / {821.5} / {{932.5}}
(231.805
)/
((
269.11
))
/
[325.17
]/
[[
395.37
]]
/
{463.0} / {{525.5}}
( 468.4) / ( (536.0) )/ [ 647.35] / [[ 786.6]] / {907.5} / {{1018.5}}
(304.0
)/
((
342.0
))
/
[415.27
]/
[[
500.3
]]
/
{568.0} / {{630.5}}
(335.0
)/
((
372.0
))
/
[450.17
]/
[[
535.3
]]
/
{608.5} / {{668.5}}
(31.0
)/
((
30.0
))
/
[10.1
]/
[[
35.00
]]
/
{38.0} /{{38.0}}
(192.0
)/
((
210.0
))
/
[252.54
]/
[[
294.65
]]
/
{331.5} / {{362.75}}
( 75.0) / ((75.0)) / [75.0]
(75.0
) / ((75.0)) / [75.0]
( 70.3) / ( (70.3) )/ [ 87.49] /
[[ 95.7]] / {106.0} / {{118.5}}
[ [200.0] ] / {200.0} / {{200.0}}
[[
100.0]
]/
{200.0
}/
{{200.0}}
( ) : 19"
(( )) : 22"
[ ] : 26"
[[ ]] : 32"
{ } : 37"
{{ }} : 42"
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 5A fuse.
Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or
Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or
ASA
and of
DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and
disposed of in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 5A socket outlet, as a
serious electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and
disposed of in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 5A socket outlet, as a
serious electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:
The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live
Brown: Live
As the colours of the wires in the mains lead of this product may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
• The wire which is coloured blue must be connected to the plug terminal which is marked N or
markings identifying the terminals in your plug, proceed as follows:
• The wire which is coloured blue must be connected to the plug terminal which is marked N or
coloured black.
• The wire which is coloured brown must be connected to the plug terminal which is marked L or
coloured red.
Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin
plug.
Before replacing the plug cover make sure that:
• If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug.
• The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
plug.
Before replacing the plug cover make sure that:
• If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug.
• The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
