Read Sharp LC-37GE1E (serv.man14) User Guide / Operation Manual online
LC-37GE1E/RU
3 – 1
LC-37GE1E/RU
Service Manual
CHAPTER 3.
OPERATION MANUAL
[1] OPERATION MANUAL
Setting the TV
Standard DIN45325
plug (IEC 169-2)
75
plug (IEC 169-2)
75
ǡ coaxial cable
Antenna
Connect the antenna cable from your antenna-/cable socket or the (room-/roof) antenna for antenna input terminal on the
back of your TV set to receive digitally/terrestrially broadcast stations.
An indoor antenna can also be used under good reception conditions. Passive and active room antennas are offered
commercially. In an active antenna its power is supplied via the antenna input terminal.
The supply voltage (5V) must be correspondingly set under "Supply voltage".
back of your TV set to receive digitally/terrestrially broadcast stations.
An indoor antenna can also be used under good reception conditions. Passive and active room antennas are offered
commercially. In an active antenna its power is supplied via the antenna input terminal.
The supply voltage (5V) must be correspondingly set under "Supply voltage".
* Ferrite Core
The Ferrite Core should be permanently attached and never removed from the AC cord.
Setting the TV on the wall
Installing the LCD Colour TV requires special skill that should only be performed by qualifed service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting
or mounting that results in accident or injury.
You can ask a quali“ed service personnel about using an optional bracket to mount the TV to the wall.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting
or mounting that results in accident or injury.
You can ask a quali“ed service personnel about using an optional bracket to mount the TV to the wall.
AC cord
Product
shape
varies
in some
countries.
shape
varies
in some
countries.
Cable clamp
Cable tie
Place the TV close to the
AC outlet, and keep the
power plug within reach.
AC outlet, and keep the
power plug within reach.
Ferrite
Core *
Core *
Before making any
connections, press
down on the upper
hooks and remove the
rear terminal covers
towards you.
connections, press
down on the upper
hooks and remove the
rear terminal covers
towards you.
LC-37GE1E/RU
3 – 2
TV (Front view)
TV (Rear view)
NOTE
Only if you use an
active terrestrial
antenna, select "yes
(5V)" under "Supply
voltage".
active terrestrial
antenna, select "yes
(5V)" under "Supply
voltage".
AC INPUT terminal
OPC sensor
Remote control sensor
(Standby/On) indicator
OPC indicator
(Power button)
MENU button
(
)
/
P (
/
)
(Programme [channel] buttons)
SLEEP indicator
EXT 2 (AV) terminal
EXT 3 terminals
Headphone jack
EXT 1 (RGB) terminal
EXT 5 (HDMI/AUDIO)
terminals
terminals
Antenna input terminal
(DVB-T 5V=/80 mA)
(DVB-T 5V=/80 mA)
OUTPUT (Audio)
terminals
terminals
EXT 4 terminals
RS-232C terminal
COMMON INTERFACE
slot
slot
EXT 6 (HDMI) terminal
LC-37GE1E/RU
3 – 3
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Do not mix batteries of different types. Different types of batteries have different characteristics.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any
chemical leakage, wipe thoroughly with a cloth.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any
chemical leakage, wipe thoroughly with a cloth.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
30°
30°
Remote control sensor
5 m
Press and slide the battery cover to open it.
Insert two supplied "AAA" size batteries.
Place batteries with their terminals corresponding
to the ( + ) and ( - ) indications in the battery
compartment.
to the ( + ) and ( - ) indications in the battery
compartment.
Close the battery cover.
1
2
2
3
Inserting the batteries
Before using the TV for the first time, insert two "AAA" size batteries (supplied). When the batteries become
depleted and the remote control unit fails to operate, replace the batteries with new "AAA" size batteries.
depleted and the remote control unit fails to operate, replace the batteries with new "AAA" size batteries.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control
unit and sensor may prevent proper operation.
unit and sensor may prevent proper operation.
Cautions regarding the remote control unit
Do not expose the remote control unit to shock.
In addition, do not expose the remote control unit to liquids, and do not place in an
area with high humidity.
Do not install or place the remote control unit under direct sunlight. The heat may
cause deformation of the unit.
The remote control unit may not work properly if the remote control sensor of the
TV is under direct sunlight or strong lighting. In such case, change the angle of
the lighting or TV, or operate the remote control unit closer to the remote control
sensor.
In addition, do not expose the remote control unit to liquids, and do not place in an
area with high humidity.
Do not install or place the remote control unit under direct sunlight. The heat may
cause deformation of the unit.
The remote control unit may not work properly if the remote control sensor of the
TV is under direct sunlight or strong lighting. In such case, change the angle of
the lighting or TV, or operate the remote control unit closer to the remote control
sensor.
LC-37GE1E/RU
3 – 4
Remote control unit
1 2
3
4
7
9
10
15
16
12
8
5
6
6
11
14
17
13
18
19
21
27
29
30
22
23
23
25
24
28
26
20
1
(Standby/On)
2
(Teletext)
TV: Display the analogue teletext.
DTV: Select DTV data broadcasting
and TELETEXT.
DTV: Select DTV data broadcasting
and TELETEXT.
3
(Reveal hidden Teletext)
4
(Subtitle for Teletext)
TV/External: Subtitle on/off.
DTV: Display the subtitle selection
screen.
screen.
5
(Freeze/Hold)
6
(Subpage)
7
0 - 9
Set the channel in TV and DTV mode.
Enter the desired numbers or letters.
Set the page in Teletext mode.
8
(Flashback)
Press to return to the previous image
in normal viewing mode.
in normal viewing mode.
9
DTV
Press to access DTV mode while
watching other input sources, and
vice versa.
watching other input sources, and
vice versa.
(Will not work if you were watching
DTV immediately before turning off
the TV. In this case “rst select any
other input source except DTV using
the
DTV immediately before turning off
the TV. In this case “rst select any
other input source except DTV using
the
button.)
10
(Sound mode)
Select the sound multiplex mode.
(See below.)
11
(Mute)
Soundon/off
12
(
/
) (Volume)
Increase/decrease volume.
13
LIST
DTV: Display the programme list.
14
DTV MENU
DTV: Display DTV Menu screen.
15
END
Exit the menu screen.
16
truD
Demonstrate the truD effects in a dual
screen format.
screen format.
17
SLEEP
Set the sleep timer on (in units of 30
min. up to max. 2hr. 30min) and off.
min. up to max. 2hr. 30min) and off.
18
(Top/Bottom/Full)
Set the area of magnifcation in
analogue teletext mode.
analogue teletext mode.
19
(INPUT SOURCE)
Select an input source.
(TV, DTV, EXT1, EXT2, EXT3, EXT4,
EXT5, EXT6)
EXT5, EXT6)
20
EPG
DTV: To display EPG (Electronic
Programme Guide) screen.
Programme Guide) screen.
ESG
DTV: To display ESG (Electronic
Service Guide) screen.
Service Guide) screen.
RADIO
DTV: Switch between RADIO and
DTV mode.
DTV mode.
21
AV MODE
Select a video setting.
22
SURROUND
Surround effects on/off.
23
P (
/
)
Select the channel.
In analogue TV mode, external input
sources (EXT 1 - 6) can also be
selected.
sources (EXT 1 - 6) can also be
selected.
24
(Display information)
25
MENU
MENU screen on/off.
26
/
/
/
(Cursor)
Select a desired item on the setting
screen.
screen.
OK
Execute a command within the menu
screen.
screen.
Display the station list in analogue
mode and the programme list in DTV
mode.
mode and the programme list in DTV
mode.
27
RETURN
Return to the previous menu screen.
28
Colour (Red/Green/Yellow/Blue)
TELETEXT: Select a page.
The coloured buttons are used to
select correspondingly to the coloured
items in the menu screen.
select correspondingly to the coloured
items in the menu screen.
29
OPC
To switch the Optical Picture Control
on and off.
on and off.
30
(Wide modes)
Select the wide mode.
Selectable items
Stereo, Mono!
Dual-channel Sound 1, Dual-
channel Sound 2, Dual-
channel Sound 1+2, Mono!
channel Sound 2, Dual-
channel Sound 1+2, Mono!
NICAM, Mono!
Signal
Stereo
Bilingual
Monaural
NOTE
When no signal is input, the sound mode will display "Mono".
"Mono!" indicates that you have manually changed to FM mono.
"Mono!" indicates that you have manually changed to FM mono.
Selectable items
Stereo, Mono!
Dual-channel Sound 1,
Dual-channel Sound 2,
Dual-channel Sound 1+2
Dual-channel Sound 2,
Dual-channel Sound 1+2
Mono
Signal
Stereo
Bilingual
Monaural
NICAM TV broadcasts selection
A2 TV broadcasts selection
Using
on the remote control unit
DTV mode:
Press
Press
to open the multi audio screen.
Analogue TV mode:
Each time you press
Each time you press
, the mode switches as illustrated in the following
tables.
