LC-37GA9EK (serv.man8). Troubleshooting Tables - Sharp TV Service Manual (repair manual). Page 6

Read Sharp LC-37GA9EK (serv.man8) Service Manual online

37
 LC-26GA5E
 LC-32GA5E
  LC-32GA9E/LC-32BV9E
  LC-37GA9E/LC-37BV9E
Troubleshooting Table (continued)
33
LC-32/37GA9E
LC-32/37BV9E
TROUBLESHOOTING TABLE
 (Continued)
<During external connection>
SCART1:
No picture appears on EXT1-connected 
monitor during the tuner (U/V) reception.
SCART2:
No picture from EXT1 appears on EXT2-
connected monitor.
Note: Normally, if the screen during display is 
sent to EXT2, no picture is sent to EXT2.
SCART2:
No picture from EXT3 appears on EXT2-
connected monitor.
YES
Is video signal 
sent to pin (19) of 
SCART1 (J1101)?
Check SCART1, 
external 
connection or input 
setting.
Is video signal 
sent to pin (40) of 
SCART2 (J1101)?
YES
Check SCART2, 
external 
connection or input 
setting.
Is video signal 
sent to pin (40) of 
SCART2 (J1101)?
YES
Check SCART2, 
external 
connection or input 
setting.
NO
NO
NO
 No picture on the monitor (2)
Checklist:
1) Are input terminal on back of TV and "INPUT SOURCE" button        on the remote control set up correctly? ••• See the operation manual and set    
    "INPUT SOURCE" appropriately.
2) Is the specified device selected for Signal Type (item) in MENU-Option-Input Select? ••• Set it to "CVBS", "Y/C" or "RGB".
3) Is ANT-CABLE disconnected or connected improperly? ••• Connect it correctly as per the operation manual.
4) The picture is sent to the monitor in a CVBS signal if the source during display is TV, CVBS or Y/C of EXT1-3. When sent by component, etc., that 
    signal is not sent to the monitor.
5) When the monitor picture is not sent and is not displayed on the monitor, refer to “No picture” for each terminal.
6) The video output from EXT1 is not the monitor output (output of the picture now watching). The picture of the last selected TV channel is always sent to 
    EXT1. (Specification)
YES
Is video signal (V-
OUT1) sent from 
pin (2) of IC1102 
(SW)?
Check SCART1 
(J1101) and 
peripheral circuits.
Is video signal (V-
OUT2) sent from 
pin (2) of IC1101 
(SW)?
YES
Check SCART2 
(J1101) and 
peripheral circuits.
Is video signal (V-
OUT2) sent from 
pin (2) of IC1101 
(SW)?
YES
Check SCART2 
(J1101) and 
peripheral circuits.
NO
NO
NO
YES
Is video signal (V-
OUT1) sent from 
pin (195) of 
IC3002 (VCT)?
Check IC3002 
(VCT) and 
peripheral circuits.
Is video signal (V-
OUT2) sent from 
pin (194) of 
IC3002 (VCT)?
YES
Check IC3002 
(VCT) and 
peripheral circuits.
Is video signal (V-
OUT2) sent from 
pin (194) of 
IC3002 (VCT)?
YES
Check IC3002 
(VCT) and 
peripheral circuits.
NO
NO
NO
YES
Is video signal 
(CVBS) sent to pin 
(191) of IC3002 
(VCT)?
Check power 
supply of IC3002 
(VCT) and 
peripheral circuits.
Is video signal 
(VIN1) from EXT1 
sent to pin (190) of 
IC3002 (VCT)?
YES
Check power 
supply of IC3002 
(VCT) and 
peripheral circuits.
Is video signal 
(VIN7) from EXT3 
sent to pin (184) of 
IC3002 (VCT)?
YES
Check power 
supply of IC3002 
(VCT) and 
peripheral circuits.
NO
NO
NO
YES
Is video signal 
(CVBS) sent from 
pin (17) of IC201 
(IF-DEMOD)?
Check 
CONNECTOR 
(P201, SC2705) and 
peripheral circuits.
Check whether 
video signal is sent 
to pin (20) of 
SCART1.
YES
Check SCART1, 
IC2702 (SW), 
CONNECTOR 
(SC2702, P1101) 
and peripheral 
circuits.
Is video signal 
(IN3YV) sent to pin 
(2) of IC1201 
(SW)?
YES
Check pin (184) of 
IC3002 (VCT), 
CONNECTOR 
(SC2703, P1102) 
and peripheral 
circuits.
NO
NO
NO
YES
Is video signal (IF) 
sent from pin (8) of 
tuner (TU201)?
Check IC201, 
FL201 (SAW-FIL), 
Q202 and 
peripheral circuits.
Check SCART1, 
external 
connection or input 
setting.
Is video signal 
(CVBS) sent from 
pin (1) of A/V-
TERMINAL
(J1201)? (EXT3)
YES
Check pin (1) 
(IN3SW) of IC1201 
(SW), power 
supply and 
peripheral circuits.
NO
Check A/V-
TERMINAL
(J1201), external 
connection or input 
setting.
NO
Check 5/35 V power supply pins (7) and (9), 
I2C line pins (5) and (4) of tuner (TU201) and 
peripheral circuits.
Page of 12
Display

Click on the first or last page to see other LC-37GA9EK (serv.man8) service manuals if exist.