LCD 2006 08 07
Date of Issue: 1
LCD TELEVISION TECHNICAL BULLETIN
Page 1 of 1
Sharp Electronics (UK) Limited
Reference - SP062701X
Revision - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
SYMPTOM No power, no sound or picture. LED's do not operate and the backlight does not turn
Update the VCT software to the latest version.
After updating the VCT software carry out the following:
1. Ensure that the 'Inch Setting' is set to the correct screen size.
2. Set the country in the adjustment mode:
Enter the adjustment process mode.
ii. Bring the cursor to 'FACTORY INIT'.
iii. Use the Volume keys to select the coutry.
iv. Press Enter. 'EXECUTING' appears and the initilization starts.
v. DO NOT turn off the unit during this process.
vi. After a while 'OK' is displayed.
vii. Exit the adjustment mode.