LC-37GA9EK (serv.man33). Operations Manual - Sharp TV User Guide / Operation Manual

Model
LC-37GA9EK (serv.man33)
Pages
28
Size
1.68 MB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
TV / LCD / Operations Manual
File
lc-37ga9ek-sm33.pdf
Date

View Sharp LC-37GA9EK (serv.man33) User Guide / Operation Manual online

LCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISION COULEUR À ÉCRAN
À CRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
LCD-KLEURENTELEVISIE
TELEVISIÓN EN COLOR LCD
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE MANEJO
LC-32GA9E   LC-37GA9E
Printed in Malaysia
Gedruckt in Malaysia
Imprimé en Malaisie
Stampato in Malesia
Gedrukt in Maleisië
Impreso en Malasia
TINS-C166WJN1
OPERATION MANUAL / BEDIENUNGSANLEITUNG / MODE D’EMPLOI / MANUALE DI ISTRUZIONI / GEBRUIKSAANWIJZING / MANUAL DE MANEJO
LC-32GA9E
LC-37GA9E
C166WJN1
1
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
NEDERLANDS
ESPAÑOL
06P05-MA-NG
PIN
Printed on environmentally friendly paper
Auf ökologischem Papier gedruckt
Imprimé sur papier écologique
Stampato su carta ecologica
Afgedrukt op ecologisch papier
Impreso en papel ecológico
396,0
396.0
612,0
612.0
114,5
114.5
183.9
120.4
183,9
120,4
(59,0) / [61,0]
(59.0) / [61.0]
7,5
7.5
(811.2)
 
/ [928.2]
(811,2)
 
/ [928,2]
(648.0)
 
/ [716.7]
(401.8)
 
/ [436.2]
(401,8)
 
/ [436,2]
(648,0)
 
/ [716,7]
(589.0)
 
/ [655.7]
(589,0)
 
/ [655,7]
(700.4)
 
/ [822.6]
(700,4)
 
/ [822,6]
(115,0)
 
/ [104,0]
(115.0)
 
/ [104.0]
(395.1)
 
/ [463.8]
(395,1)
 
/ [463,8]
200,0
200.0
200,0
200.0
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should
the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked 
 or 
ASA
 and of the same rating
as above, which is also indicated on the pin face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the
mains plug and fit an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of
in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious
electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this product may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
• The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black.
• The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug.
Before replacing the plug cover make sure that:
• If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug.
• The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
LC-32/37GA9E
(   )  : LC-32GA9E
[   ]  : LC-37GA9E
: LC-32/37GA9E
1
OPERATION MANUAL
ENGLISH
Dear SHARP customer …………………………………… 1
Contents …………………………………………………… 1
Important Safety Precautions
………………………… 2
Supplied accessories …………………………………… 2
Quick guide ………………………………………………… 3
Attaching the stand …………………………………… 3
Setting the TV ………………………………………… 3
Inserting the batteries ………………………………… 4
Using the remote control unit ………………………… 4
        Cautions regarding the remote control unit
… 4
Remote control unit …………………………………… 5
TV (Front view) ………………………………………… 6
TV (Rear view) ………………………………………… 6
Turning on the power ………………………………… 7
Standby mode ………………………………………… 7
Turning off the power ………………………………… 7
Initial auto installation ………………………………… 7
Using the programme list …………………………… 7
Using external equipment ……………………………… 8
Connecting a VCR …………………………………… 8
Connecting a game console or camcorder ………… 8
Connecting a DVD player …………………………… 8
Connecting a decoder
……………………………… 9
Connecting a PC ……………………………………… 9
Using AV Link function
……………………………… 9
Menu operations
………………………………………… 10
Menu operation buttons ……………………………… 10
On-Screen Display …………………………………… 10
Common operations
………………………………… 11
Picture menu …………………………………………… 12
AV Mode …………………………………………… 12
OPC
…………………………………………… 12
Picture adjustments ……………………………… 12
Advanced ………………………………………… 12
Colour Temp. ………………………………… 12
Black ………………………………………… 13
3D-Y/C
……………………………………… 13
Monochrome ………………………………… 13
Film Mode …………………………………… 13
truD …………………………………………… 13
I/P Setting …………………………………… 13
Audio menu …………………………………………… 13
AV Mode …………………………………………… 13
Audio adjustments ……………………………… 13
Surround …………………………………………… 13
Auto Vol. …………………………………………… 13
Contents
Clear Voice
……………………………………… 13
Power Control menu
………………………………… 14
No Signal Off ……………………………………… 14
No Operation Off ………………………………… 14
Power Management ……………………………… 14
Setup menu …………………………………………… 14
Auto Installation
………………………………… 14
Programme Setup ………………………………… 14
Auto Search ………………………………… 14
Manual Adjust
……………………………… 15
Fine ……………………………………… 15
Colour sys. ……………………………… 15
Sound sys. (Broadcasting system) …… 15
Label
…………………………………… 15
Skip ……………………………………… 15
Decoder ………………………………… 15
Lock ……………………………………… 15
Sort …………………………………………… 15
Erase Programme …………………………… 15
       Child Lock ………………………………………… 16
Input Label ………………………………………… 16
Fine Sync. ………………………………………… 16
Position …………………………………………… 17
WSS (Wide Screen Signalling) ………………… 17
4:3 Mode
………………………………………… 17
Rotate
…………………………………………… 17
Language ………………………………………… 17
Option menu …………………………………………… 17
Audio Only ………………………………………… 17
DNR (Digital Noise Reduction) ………………… 18
HDMI Setup ……………………………………… 18
Input Select ……………………………………… 18
Quick Shoot ……………………………………… 18
Colour System …………………………………… 18
Demo
…………………………………………… 18
Useful features …………………………………………… 19
WIDE MODE …………………………………………… 19
Still image
…………………………………………… 20
Teletext function ……………………………………… 20
Appendix …………………………………………………… 21
Troubleshooting
……………………………………… 21
RS-232C port specifications ………………………… 22
Specifications ………………………………………… 23
Optional accessories ………………………………… 23
PC compatibility chart ………………………………… 23
End of life disposal …………………………………… 24
• The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from
the actual operations.
• The examples used throughout this manual are based on the LC-32GA9E model.
• The factory preset PIN is “1234”.
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
ENGLISH
TV/AV only
PC only
AV only
: these icons used throughout this manual indicate the menu item
can be set or adjusted only in the selected input mode.
TV only
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-
free operation of your product, please read the Important Safety Precautions carefully before using this product.
Dear SHARP customer
• truD is a registered trademark of Micronas in Germany and other countries.
• The “HD ready” Logo is a trademark of EICTA.
LC-32GA9E_GB_a
06.4.27, 9:46 AM
1
2
Important Safety Precautions
• Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the
product. Do not use liquid cleaners or aerosol cleaners.
• Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub,
swimming pool and in a wet basement.
• Do not place vases or any other water-filled containers on this product.
The water may spill onto the product causing fire or electric shock.
• Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can
cause the product to fall, resulting in serious personal injuries as well as damage to the product.
Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with
the product. When mounting the product on a wall, be sure to follow the manufacturer’s
instructions. Use only the mounting hardware recommended by the manufacturer.
• When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops,
excessive force and uneven floor surface can cause the product to fall from the cart.
• Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not
cover or block these vents and openings since insufficient ventilation can cause overheating
and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since
they can block ventilation openings. This product is not designed for built-in installation; do not place the product
in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s
instructions are followed.
• The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or
impact applied. If the LCD panel is broken, be careful not to be injured by broken glass.
• Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-
generating products (including amplifiers).
• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
• There is power consumption always if main plug is connected.
The LCD panel is a very high technology product, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as
a fixed point of blue, green or red.
This is within product specifications and does not constitute a fault.
Precautions when transporting the TV
When moving the TV, it should always be carried by two people, using both hands, be careful not to apply
pressure to the display.
Supplied accessories
Remote control unit (g1)
AC cord (g1)
Pages 4 and 5
Product shape varies in
some countries.
Page 3
• “AAA” size battery (g2) ...... Page 4
Cable clamp (g1)
Page 3
Cable tie (g1)
Page 3
3 RCA to 15-pin D-sub
adapter (g1)
Page 8
• Operation manual (This publication)
Stand unit (g1)
Page 3
LC-32GA9E_GB_a
06.4.27, 9:46 AM
2
3
Quick guide
Attaching the stand
Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal.
1
Confirm the 8 screws supplied with the TV.
Short screws (m4)
(used in step 2)
Long screws (m4)
(used in step 4)
2
Attach the two parts of the stand unit to each other
using the 4 short screws as shown.
3
Insert the stand into the opening on the bottom of
the TV.
4
Insert and tighten the 4 long screws on the rear
of the TV as shown.
NOTE
• To detach the stand, perform the steps in reverse order.
Before performing work spread cushioning over the base area to lay the TV on, making sure the
area is completely flat. This will prevent it from being damaged.
Setting the TV
Standard DIN45325
plug (IEC 169-2)
75-ohm coaxial cable
Setting the TV on the wall
• Installing the LCD Colour TV requires special skill that should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting
or mounting that results in accident or injury.
• You can ask a qualified service personnel about using an optional bracket to mount the TV to the wall.
Ferrite Core
The Ferrite Core should be permanently attached
and never removed from the AC cord.
AC cord
Product shape
varies in some
countries.
Place the TV close to the
AC outlet, and keep the
power plug within reach.
Ferrite Core
Cable clamp
Cable tie
LC-32GA9E_GB_a
06.4.27, 9:46 AM
3
4
Quick guide
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any
chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
30
°
30
°
Remote control sensor
5 m
1
Press and slide the battery cover to open it.
2
Insert two supplied “AAA” size batteries.
• Place batteries with their terminals corresponding
to the (e) and (f) indications in the battery
compartment.
3
Close the battery cover.
Inserting the batteries
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote
control unit and sensor may prevent proper operation.
Cautions regarding the remote control unit
• Do not expose the remote control unit to shock.
In addition, do not expose the remote control unit to liquids, and do not
place in an area with high humidity.
• Do not install or place the remote control unit under direct sunlight. The
heat may cause deformation of the unit.
• The remote control unit may not work properly if the remote control sensor
of the TV is under direct sunlight or strong lighting. In such case, change
the angle of the lighting or TV, or operate the remote control unit closer to
the remote control sensor.
LC-32GA9E_GB_a
06.4.27, 9:46 AM
4
5
Remote control unit
Quick guide
Selectable items
NICAM STEREO, MONO
NICAM CH A, NICAM CH B,
NICAM CH AB, MONO
NICAM MONO, MONO
Signal
Stereo
Bilingual
Monaural
Selectable items
STEREO, MONO
CH A, CH B, CH AB
MONO
Signal
Stereo
Bilingual
Monaural
NOTE
• When no signal is input, the sound mode will display “MONO”.
 3 (Freeze/Hold)
(See page 20.)
B (Standby/On)
Enter standby mode or
turn on the power.
(See page 7.)
[ (Subtitle for Teletext)
(See page 20.)
END
Exit the menu screen.
i (k/l) (Volume)
i (k) Increase the volume.
i (l) Decrease the volume.
0–9
Set the channel in TV mode.
Set the page in Teletext mode.
A (Flashback)
Press to return to the previous
image in normal viewing mode.
2 (Sound mode)
Select the sound multiplex mode.
(See below.)
truD
Demonstrate the truD effects in a
dual screen format.
(See page 13.)
(Subpage)
(See page 20.)
SLEEP
Set the sleep timer in units of 30
min. up to max. 2hr. 30min.
k (Reveal hidden Teletext)
(See page 20.)
p (Display information)
(See page 20.)
RETURN
Return to the previous menu
screen.
e (Mute)
Switch the sound on and off.
b (INPUT SOURCE)
Select an input source.
(TV, EXT1, EXT2, EXT3, EXT4,
EXT5, EXT6)
(See page 8.)
f (WIDE MODE)
Select the wide mode.
(See page 19.)
Set the area of magnification in
Teletext mode. (See page 20.)
MENU
Display the MENU screen.
(See page 10.)
P (r/s)
TV: Select the channel.
External: Switch to TV input mode.
Teletext: Move to the next/previous
page.
OK
Execute a command within the
menu screen.
Display the programme list.
(See page 7.)
a/b/c/d (Cursor)
Select a desired item on the
setting screen.
Colour (Red/Green/Yellow/
Blue)
(See page 20.)
m (Teletext)
(See page 20.)
NICAM TV broadcasts selection
A2 TV broadcasts selection
LC-32GA9E_GB_a
06.4.27, 9:46 AM
5
6
TV (Front view)
Quick guide
TV (Rear view)
AC INPUT terminal
OPC sensor
Remote control sensor
B (Standby/On) indicator
OPC indicator
a (Power button)
b (Input button)
i (l/k)
(Volume buttons)
P (s/r)
(Programme [channel] buttons)
SLEEP indicator
EXT 2 (RGB) terminal
EXT 3 terminals
Headphone jack
EXT 1 (RGB) terminal
EXT 5 (HDMI/AUDIO)
terminals
Antenna input terminal
OUTPUT (Audio) terminals
EXT 4 terminals
RS-232C terminal
EXT 6 (HDMI) terminal
LC-32GA9E_GB_a
06.4.27, 9:46 AM
6
7
Turning on the power
Press a on the TV.
• The B indicator on the TV changes from red to green.
NOTE
• If you are not going to use this TV for a long period of
time, be sure to remove the AC cord from the power outlet.
• Weak electric power is still consumed even when a is
turned off.
Initial auto installation
When the TV powers on for the first time after purchase,
the initial auto installation is invoked. You can
automatically set language, country and channels in
successive operations.
1
Setting the on-screen display language
1 Press a/b/c/d to select the desired language
listed on the screen.
2 Press OK to enter the setting.
2
Setting the country or area
1 Press  a/b/c/d to select your country or area
listed on the screen.
2 Press OK to enter the setting.
• The programme auto search starts at the same time.
After this setting, auto search starts with the following
order.
1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download
You do not need to do anything during the auto search.
NOTE
• The initial auto installation functions only once. If the initial
auto installation is not completed, (ex: When menu screen
disappeared by not operating for a few minutes, when
the power shut down, etc.), try Auto Installation from the
Setup menu. (See page 14.)
• The initial auto installation stops by pressing RETURN.
Standby mode
Press B on the remote control unit.
• The TV enters standby mode and the image on the screen
disappears.
• The B indicator on the TV changes from green to red.
Turning off the power
Press a on the TV.
• The B indicator on the TV gradually turns off.
• When the TV is turned off by a, you cannot turn on the
power by pressing B on the remote control unit.
Off
Red
Green
Display status indicator
Power off
The TV is in standby mode.
The TV is on.
Using the programme list
You can also select the desired channel from
programme list instead of using 0-9 numeric buttons
or P (
r
r
r
r
r/s
s
s
s
s).
The setup menu disappears and you can watch the
programme on channel 1.
1
Press  OK when no other menu screen is
displayed.
2
Press a/b to select the desired channel to tune
in, and then press OK.
3
Press END to exit the Programme List.
Quick guide
LC-32GA9E_GB_a
06.4.27, 9:46 AM
7
8
Using external equipment
Setting the input source
To view external source images, select the input source using b on the remote control unit or TV.
NOTE
• The cables marked with * are commercially available items.
Connecting a VCR
You can use the EXT 1 or 2 terminals when connecting
a VCR and other audiovisual equipment.
If your VCR supports TV-VCR advanced AV Link
systems, you can connect the VCR to the EXT 2
terminal of the TV using the fully-wired SCART cable.
NOTE
• TV-VCR advanced AV Link systems may not be compatible
with some external sources.
• TV-OUT from EXT 1 is not outputted when EXT 5 (HDMI)
or EXT 6 (HDMI) is selected as the input.
YP
B
(
C
B)
P
R
(
C
R)
COMPONENT
EXT 4
ø 3.5 mm stereo minijack cable*
Component
cable*
3 RCA to 15-pin
D-sub adapter
(Supplied)
VCR
Decoder
SCART cable*
SCART cable*
EXT 1 or 2
VIDEO
S-VIDEO
L-AUDIO-R
AV OUTPUT
Connecting a DVD player
You can use the EXT 2, 3, 4, 5 (HDMI) or 6 (HDMI)
terminals when connecting to a DVD player and other
audiovisual equipment.
DVD player
AUDIO cable*
EXT 3
A game console, camcorder and some other
audiovisual equipment are conveniently connected
using the EXT 3 terminals.
NOTE
• EXT 3: The S-VIDEO terminal has priority over the VIDEO
terminals.
Connecting a game console or
camcorder
Game console Camcorder
or
S-video cable*
Composite
video cable*
AUDIO cable*
EXT 3
Composite
video cable*
VIDEO
S-VIDEO
L-AUDIO-R
AV OUTPUT
or
DVD player
S-video cable*
NOTE
• When connecting an HDMI-DVI conversion adapter/cable
to the HDMI terminal, the image may not come in clearly.
NOTE
• EXT 3: The S-VIDEO terminal has priority over the VIDEO
terminals.
DVD player
HDMI-DVI conversion
adapter/cable*
When using an HDMI-DVI
conversion adapter/cable,
input the Audio signal here.
If not, use EXT 6.
EXT 5
DVD player
HDMI cable*
EXT 6
LC-32GA9E_GB_a
06.4.27, 9:47 AM
8

Download Sharp LC-37GA9EK (serv.man33) User Guide / Operation Manual

Here you can view online and download Sharp LC-37GA9EK (serv.man33) User Guide / Operation Manual in PDF. LC-37GA9EK (serv.man33) user guide / operation manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp LC-37GA9EK (serv.man33) LCD. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.