Read Sharp LC-32SH330E (serv.man2) User Guide / Operation Manual online
TV menu
Features
Select menu language
Select the menu display language.
1�
Press
MENU on your remote control and select
Features ≥ Menu language.
2�
Press ≤≥ to select your language.
3�
Follow the on-screen instructions to exit.
4:3 Mode
Select aspect ratio behavior for Auto mode. When 4:3
is selected, the picture size will follow WSS or Scart
Pin8 Spec. If 16:9 is selected, the picture format will
change to wide screen.
1�
Press
MENU on your remote control and select
Features ≥ 4:3 Mode.
2�
Press ≤≥ to select the mode your preferred.
3�
Follow the on-screen instructions to exit.
Change picture format
Change the picture format to suit your content.
1�
Press ∏ repeatedly to select one of the
following picture formats. Alternatively, press
MENU and select Features > Picture Format.
Auto
The Automatic format
for DTV transports
streams with AFD
information, while
for ATV and SCART
should be with WSS
information.
for DTV transports
streams with AFD
information, while
for ATV and SCART
should be with WSS
information.
Normal (Not for HD)
Displays the classic 4:3
format.
format.
NOTE
• Constant use of the
Normal picture format can cause
screen distortion.
E
Assign a channel decoder (For ATV)
Decoders that decode channels can be connected
to SCART. You have to assign the TV channel as a
channel to be decoded. Before selecting channels,
make sure your TV is connected to SCART.
1�
Press
MENU on the remote control and select
TV ≥ Channels�
NOTE
• You are prompted to enter current password to enter
Channels if Channel Block /Parental Guidance /
Input Block in the Parental menu is not the default
setting.
Input Block in the Parental menu is not the default
setting.
2�
Press <> to select
Decoder and press OK or
≥ to enter available analogue channel list.
3�
Press <> to select the channel to decode.
4�
Press
OK to mark or cancel.
5�
Follow the on-screen instructions to exit.
E
Analogue Ch Fine Tune
You can manually fine tune analogue channels when
reception is poor.
1�
Press
MENU on the remote control and select
TV ≥ Channels.
NOTE
• You are prompted to enter current password to enter
Channels if Channel Block / Parental Guidance /
Input Block in the Parental menu is not the default
setting.
Input Block in the Parental menu is not the default
setting.
2�
Press <> to select
Analogue Ch Fine Tune
and press
OK or ≥ to enter the analogue
channel list.
3�
Press <> to select one channel and press
OK
to enter.
4�
Press ≤≥ to adjust the frequency.
5�
When complete, press
OK to set the frequency.
The fine tuned channel is stored under the
current channel number.
6�
Follow the on-screen instructions to exit.
E
Clean Channel List
Select to clean all the channels that stored in the
channel list.
1�
Press
MENU on the remote control and select
TV ≥ Channels�
NOTE
• You are prompted to enter current password to enter
Channels if Channel Block /Parental Guidance /
Input Block in the Parental menu is not the default
setting.
Input Block in the Parental menu is not the default
setting.
2�
Press <> to select
Clean Channel List and
press
OK or ≥ to enter.
3�
Select
OK and press OK on the remote control
to clean channel list.
16
Click on the first or last page to see other LC-32SH330E (serv.man2) service manuals if exist.