LC-32SH130K (serv.man18) - Sharp TV User Guide / Operation Manual. Page 23

Read Sharp LC-32SH130K (serv.man18) User Guide / Operation Manual online

English   - 23 -
this case, OSD will display the programmed events 
for recording.
Press   (STOP) button to cancel instant recording. 
The following OSD will be displayed:
Select Yes by using “ ” or “ ” / OK buttons to cancel 
instant recording.
Note: Switching to a different broadcast or source; 
and viewing Media Browser are not available during 
the recording.
Watching Recorded Programmes 
In the main menu, use “ ” or “ ” buttons to select 
Media Browser. Highlight Recordings Library item by 
using “ ” or “ ” button and press OK button to enter. 
Recordings Library will then be displayed.
IMPORTANT: To view recordings library, you should 
fi rst connect a USB disk to your TV while the TV is 
switched off. You should then switch on the TV to 
enable recording feature. Otherwise, recording feature 
will not be available.
 
Select a recorded item from the list (if previously 
recorded) by using “ ” / “ ”  button. Press OK button 
to view Play Options. Select an option by using “ ” 
/ “ ”
 or OK buttons.
Available playback options:
Play from start: Plays the recording from the 
• 
beginning.
Resume: Recommences the recordings.
• 
Play from offset: Specifi es a playing point.
• 
Note: Viewing main menu and menu items will not be 
available during the playback.
Press   (STOP) button to stop a playback and return 
to return to Recordings Library.
Slow Forward
If you press   (PAUSE) button while watching 
recorded programmes, slow forward feature will be 
available. You can use 
 button to slow forward. 
Pressing 
 button consecutively will change slow 
forwarding speed.
Changing Image Size: Picture 
Formats
You can change the aspect ratio (image size) of 
• 
the TV for viewing the picture in different zoom 
modes.
Press 
• 
“SCREEN” button repeatedly to change 
the image size. Available zoom modes are listed 
below.
Auto
When AUTO is selected, the aspect ratio of the screen 
is adjusted by the information provided by the selected 
source (if available).
The format being displayed in AUTO mode is 
completely independent of WSS information which 
could be included in the broadcast signal or the signal 
from an external device.
Note:  Auto mode only will be available in HDMI, 
YPbPr and DTV sources.
16:9
This uniformly stretches the left and right sides of a 
normal picture (4:3 aspect ratio) to fi ll the wide TV 
screen.
For 16:9 aspect ratio pictures that have been 
• 
squeezed into a normal picture (4:3 aspect ratio), 
use the 16:9 mode to restore the picture to its 
original shape.
00_MB60_[GB]_1910UK_IDTV_PVR_NICKEL16_32883W_YPBPR_ROCKER_10072639_50186863.indd   23
00_MB60_[GB]_1910UK_IDTV_PVR_NICKEL16_32883W_YPBPR_ROCKER_10072639_50186863.indd   23
02.06.2011   13:09:22
02.06.2011   13:09:22
Page of 40
Display

Click on the first or last page to see other LC-32SH130K (serv.man18) service manuals if exist.