Read Sharp LC-32P70E (serv.man7) Service Manual online
25
LC-26GA5E
LC-32GA5E
LC-26P70E
LC-32P70E
LC-37P70E
24
LC-26GA5E
LC-32GA5E
LC-26P55E
LC-32P55E
LC-37P55E
10. Public Mode (Hotel Mode)
10.1 How to Enter in the Public Mode (Hotel Mode).
Turn on the power and enter in the Adjustment Process mode (ADJ1 or Service Mode) as usual.
In the [INIT], Page 2/11 of Service, turns ON the Public Mode option.
Turn off TV by pressing Main Power switch.
While pressing “VOL+”and “P^” keys at the same time, press Main Power switch for more than 2 seconds.
After this sequence the TV will turn on showing the Public Mode setting screen as follows:
Is possible to select each item of function by pressing cursor UP/DOWN keys on the remote control or CH(∧)(∨) keys
on the LCD TV.
The setting position of each item of functions is made by pressing cursor RIGHT/LEFT keys on the remote control
or VOL(+)(-) keys on the LCD TV.
Select ENTER position after you set all function, and press cursor RIGHT/LEFT keys on the remote control or
VOL(+)/(-) keys on the LCD TC for confi rmation.
10.2. Public Mode Settings.
1. POWER ON FIXED [
VARIABLE �FIXED]
When it is set to “FIXED” the TV is impossible to be switch off by Main Switch or Remote Control.
2. MAXIMUM VOLUME [
0 � 60]
Is possible to set the maximum volume at limited level.
3. VOLUME FIXED [
VARIABLE � FIXED]
Is possible to fi x the sound volume at limited level.
When “FIXED” is selected the sound volume before limited is fi xed.
4.VOLUME FIXED LEVEL [
0 � 60]
If “FIXED” has been selected, is possible to set a fi xed volume at the level that is choosen.
5. RC BUTTON [
RESPOND � NO RESPOND]
If “NO RESPOND” is selected, the remote control keys are inoperative.
6. PANEL BUTTON [
RESPOND � NO RESPOND]
If “NO RESPOND” has been selected, the set´s keys remain deactivated (Except POWER key).
7. MENU BUTTON [
RESPOND � NO RESPOND]
If “NO RESPOND” has been selected, “MENU” keys, both on the set and remote control, are inoperative.
8. ON SCREEN DISPLAY [YES
�
NO]
If “NO” has been selected, the On Screen Display does not appear.
9. INPUT MODE START [
NORMAL�TV (X)�INPUT1 �INPUT2�INPUT3 � INPUT4 � INPUT5 �]
When any other item than “NORMAL” has been selected, the sets will start in a selected input mode at the next
power-on.
10. INPUT MODE FIXED [
VARIABLE �FIXED]
If “FIXED” has been selected, any channels and input modes other than those selected at the start mode cannot be
picked up.
11. RESET
Cancel all Public Mode settings. (It returns to the factory settings)
12. EXECUTE
After select this item, all positions that has been selected will not be set.
MAXIMUM VOLUME [60]
VOLUME FIXED [VARIABLE]
VOLUME FIXED LEVEL [0]
RC BUTTON [RESPOND]
PANEL BUTTON [RESPOND]
MENU BUTTON [RESPOND]
ON SCREEN DISPLAY [YES]
INPUT MODE START [NORMAL]
INPUT MODE FIXED [VARIABLE]
RESET
EXECUTE
EXECUTE
POWER ON FIXED
[VARIABLE]
Public Mode
